Thank you very much for your reply . But please be informed that our current line-outgoing route is being configured as the followings (in extensions.conf):
" [line-outgoing] exten => _X.,1,macro(dialuser,Zap/g1/${EXTEN},${EXTEN}) " As you see , it is trying to consider the dialed number as an whole packet (but not based on one-by-one digit basis) . Can you please do us favor and let us know how we can get benefit of your proposed DigitTimeout command to fulfill the job ? Regards H.Motamedi On Thu, Jul 30, 2009 at 5:28 AM, Marc Charbonneau <timebandit...@gmail.com>wrote: > > I mean when the subs dials the digits with some delay between entering > the > > digits sequentially . At our current case , the Asterisk will wait about > 2 > > seconds to see if another digit will be dialed or not and then he will > route > > the dialed digits according to the pre-defined routing table or he will > play > > the appropriate announcements . We are expected to increase this inter > digit > > delay to say 4 seconds . Please let us know how we can increase this > > parameter in our Asterisk configuration files . > see http://www.voip-info.org/tiki-index.php?page=Asterisk+cmd+DigitTimeout > > also, I suggest you read this book : http://astbook.asteriskdocs.org/ > > hth > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2009 - October 13 - 15 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users