On Tue, 13 Jan 2004, James Sharp wrote: > > I have a little more info on this. Following the suggestion of another > > post on > > this topic I tracked down an analog phone with lighted buttons powered by > > the > > phone connection. I directly connected the phone to one of my inbound > > lines and > > called it with my cell phone. Picked up the analog phone, verified call > > completion and then hung up my cell. I watched and waited for the lights > > to go > > out. Sure enough they did, but it took 8 seconds from the time of the > > hangup. > > After the flash more phone started emitting a dialtone sound. Is this > > correct? I > > was under the impression the voltage drop would happen almost immediately. > > Do you have another analog line that's on the same Central office as the > line in question? The delay could be lag time betwee the time you hang up > your cell phone, the cell provider MTSO processes the hang up, passes it > on to their termination provider, who then passes it on to your > termination provider, who then passes it on to you.
I will try that, but the results were consistent with what we are seeing across the board. I will call from my pbx to my test line in the morning and time the results. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users