It is probably as simple as doing a manual "modprobe wctdm".
_____ From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Angus Asterisk Sent: Sunday, September 27, 2009 11:18 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Problems with Digium TDM400 card I had a working Asterisk 1.4.24.1 installation on SUSE 9 Linux but SIP only. I then downloaded and installed latest Zaptel and could not get Zaptel working. So I downloaded Asterisk again and re-installed. But still problems: Here is my ztcfg output: asterisk:/etc/asterisk # ztcfg -vvvvv Notice: Configuration file is /etc/zaptel.conf line 4: Unable to read Zaptel version information. Zaptel Version: Unknown Echo Canceller: Unknown Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels to configure. ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25) My zaptel.conf file is in /etc/ fxsks=1-4 loadzone=uk defaultzone=uk I know config above is correct because used to work in an older Asterisk 1.2 installation. My zapata.conf file is in /etc/asterisk/ has this setting: signalling=fxs_ks What should I be looking at? Works ok for SIP but I want to get the analog card working. It is a TDM04B. Angus
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users