sean darcy wrote: > I'm trying to setup sipgate on 1.6.1. Following the instructions on the > site: http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk, > > I created [sipgate] in sip.conf and a [sipgate-in] in extensions.conf: > > [sipgate] > type=friend > secret= ;;SIP_PASSWORD > insecure=port,invite > defaultuser= ;; SIP-ID > fromuser= ;;SIP-ID > context=sipgate_in > fromdomain=sipgate.com > host=sipgate.com > outboundproxy=proxy.live.sipgate.com > qualify=yes > disallow=all > allow=ulaw > dtmfmode=rfc2833 > nat=yes > canreinvite=no > > which seems to take: > sip show user sipgate > asterisk*CLI> > > * Name : sipgate > Secret : <Set> > MD5Secret : <Not set> > Context : sipgate_in > Language : > AMA flags : Unknown > Transfer mode: open > MaxCallBR : 384 kbps > CallingPres : Presentation Allowed, Not Screened > Call limit : 0 > Callgroup : > Pickupgroup : > Callerid : "" <> > ACL : No > Sess-Timers : Accept > Sess-Refresh : uas > Sess-Expires : 1800 secs > Sess-Min-SE : 90 secs > Ign SDP ver : No > Codec Order : (ulaw:20) > Auto-Framing: No > > [sipgate-in] > exten => s,1,NoOp(Context: sipgate-in) > exten => s,n,NoOp(CALLERID(all)) > exten => s,n,NoOp(${SIP_HEADER(To)}) > > But: > > chan_sip.c:18667 handle_request_invite: Call from '7xxxxxxxx' to > extension '7xxxx' rejected because extension not found. > > 7xxxxxx is the SIP-ID. > > I've tried using _7! in sipgate-in, but no change. > > Thanks for any help. > > sean
Now I see it. sipgate_in vs. sipgate-in! sean _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users