I have a working system with asterisk 1.4.26.2 libpri 1.4.1 and zaptel 1.4.12.1 With a digium TE205p.
I am trying to update to libpri 1.4.10.2. When I do, incoming calls work but outgoing does not. When I do this I "rm /usr/lib/libpri*" then just install libpri-1.4.10.2 as normal. I then do a make clean in asterisk and make distclean ,then configure, make and make install. I do that exact same thing to get back to 1.4.1 as 1.4.10.2 does not allow me to call out. Below are the log files for both. I enabled pri intense debug span 1 for both a WORKING call and an ERROR call. I basically call into my system, selection option 2 which then calls out to my cell phone. What is the issue with 1.4.10.2? Thanks, (note I tried the same thing with other libpri versions). Jerry This is the error log: > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 044 P/F: 0 > 0 bytes of data -- Restarting T203 timer q931.c:2816 q931_call_proceeding: call 4 on channel 23 enters state 9 (Incoming Call Proceeding) -- Finally transmitting 40, since window opened up (0) > [ 00 01 50 58 08 02 80 04 02 18 03 a9 83 97 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 040 0: 0 > N(R): 044 P: 0 > 10 bytes of data Stopping T_203 timer Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=10 > Call Ref: len= 2 (reference 4/0x4) (Terminator) > Message type: CALL PROCEEDING (2) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive > Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ] -- Accepting call from '3178672038' to '3175551212' on channel 0/23, span 1 -- Executing [3175551...@smvoice-incoming:1] Dial("Zap/23-1", "SIP/a_to_b/3175551212") in new stack [Kmndemo*CLI> -- Called a_to_b/3175551212 [Kmndemo*CLI> < [ 00 01 01 52 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 041 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 39 to (but not including) 41 -- ACKing packet 40, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 timer [Kmndemo*CLI> -- SIP/a_to_b-0174a060 answered Zap/23-1 q931.c:2951 q931_connect: call 4 on channel 23 enters state 8 (Connect Request) -- Finally transmitting 41, since window opened up (0) > [ 00 01 52 58 08 02 80 04 07 18 03 a9 83 97 1e 02 81 82 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 041 0: 0 > N(R): 044 P: 0 > 14 bytes of data Stopping T_203 timer Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=14 [Kmndemo*CLI> > Call Ref: len= 2 (reference 4/0x4) (Terminator) > Message type: CONNECT (7) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive > Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ] > [1e 02 81 82] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment > is non-ISDN. (2) ] [Kmndemo*CLI> < [ 00 01 01 54 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 042 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 40 to (but not including) 42 -- ACKing packet 41, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 timer [Kmndemo*CLI> < [ 02 01 58 54 08 02 00 04 0f ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 044 0: 0 < N(R): 042 P: 0 < 5 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 41 to (but not including) 42 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 4/0x4) (Originator) < Message type: CONNECT ACKNOWLEDGE (15) q931.c:3711 q931_receive: call 4 on channel 23 enters state 10 (Active) Sending Receiver Ready (45) > [ 02 01 01 5a ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 045 P/F: 0 > 0 bytes of data -- Restarting T203 timer [Kmndemo*CLI> [Oct 25 19:01:46] DTMF[20171]: channel.c:2262 __ast_read: DTMF end '2' received on Zap/23-1, duration 0 ms [Oct 25 19:01:46] DTMF[20171]: channel.c:2288 __ast_read: DTMF begin emulation of '2' with duration 100 queued on Zap/23-1 [Kmndemo*CLI> [Oct 25 19:01:46] DTMF[20171]: channel.c:2407 __ast_read: DTMF end emulation of '2' queued on Zap/23-1 [Kmndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> -- Executing [5068...@a_to_b:1] Set("SIP/a_to_b-01756c20", "CALLERID(number)=3175551212") in new stack [Kmndemo*CLI> -- Executing [5068...@a_to_b:2] Dial("SIP/a_to_b-01756c20", "Zap/g1/3175068000") in new stack [Kmndemo*CLI> -- Making new call for cr 32771 [Kmndemo*CLI> -- Requested transfer capability: 0x00 - SPEECH [Kmndemo*CLI> -- Finally transmitting 42, since window opened up (0) [Kmndemo*CLI> > [ 00 01 54 5a 08 02 00 03 05 04 03 80 90 a2 18 03 a1 83 92 1e 02 80 83 28 0b > b1 47 45 49 53 2c 4a 45 52 52 59 6c 0c 21 80 33 31 37 35 36 36 31 36 37 37 70 > 0b a1 33 31 37 35 30 36 38 30 31 32 ] [Kmndemo*CLI> > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 [Kmndemo*CLI> > N(S): 042 0: 0 > N(R): 045 P: 0 > 59 bytes of data Stopping T_203 timer [Kmndemo*CLI> Starting T_200 timer -- Restarting T200 timer [Kmndemo*CLI> > Protocol Discriminator: Q.931 (8) len=59 > Call Ref: len= 2 (reference 3/0x3) (Originator) [Kmndemo*CLI> > Message type: SETUP (5) [Kmndemo*CLI> > [04 03 80 90 a2] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: > Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode > (16) > User information layer 1: u-Law (34) > [18 03 a1 83 92] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred > Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 18 ] > [1e 02 80 83] [Kmndemo*CLI> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: User (0) > Ext: 1 Progress Description: Calling equipment > is non-ISDN. (3) ] > [28 0b b1 47 45 49 53 2c 4a 45 52 52 59] > Display (len=11) Charset: 31 [ GEIS,JERRY ] [Kmndemo*CLI> > [6c 0c 21 80 33 31 37 35 36 36 31 36 37 37] > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number > not screened (0) '3175661677' ] [Kmndemo*CLI> > [70 0b a1 33 31 37 35 30 36 38 30 31 32] > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3175068000' ] q931.c:3134 q931_setup: call 32771 on channel 18 enters state 1 (Call Initiated) [Kmndemo*CLI> -- Called g1/3175068000 [Kmndemo*CLI> < [ 00 01 01 56 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 043 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 41 to (but not including) 43 -- ACKing packet 42, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 timer [Kmndemo*CLI> < [ 02 01 5a 56 08 02 80 03 7d 08 03 82 e3 28 14 01 00 ] < Informational frame: [Kmndemo*CLI> < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 045 0: 0 < N(R): 043 P: 0 < 13 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 42 to (but not including) 43 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 3/0x3) (Terminator) < Message type: STATUS (125) < [08 03 82 e3 28] < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2) [Kmndemo*CLI> < Ext: 1 Cause: Info. element nonexist or not implemented (99), class = Protocol Error (e.g. unknown message) (6) ] < Cause data 1: 28 (40, Display IE) < [14 01 00] < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Null (0) [Kmndemo*CLI> -- Processing IE 8 (cs0, Cause) -- Processing IE 20 (cs0, Call State) q931.c:3747 q931_receive: call 32771 on channel 18 enters state 0 (Null) Sending Receiver Ready (46) > [ 02 01 01 5c ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 [Kmndemo*CLI> > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 046 P/F: 0 > 0 bytes of data -- Restarting T203 timer -- Channel 0/18, span 1 got hangup, cause 99 [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null [Kmndemo*CLI> -- Hungup 'Zap/18-1' [Kmndemo*CLI> == Everyone is busy/congested at this time (1:0/0/1) [Kmndemo*CLI> -- Executing [5068...@a_to_b:3] Goto("SIP/a_to_b-01756c20", "_9XXXXXXX-CHANUNAVAIL|1") in new stack -- Goto (a_to_b,_9XXXXXXX-CHANUNAVAIL,1) [Kmndemo*CLI> [Oct 25 19:01:52] WARNING[20172]: pbx.c:2437 __ast_pbx_run: Channel 'SIP/a_to_b-01756c20' sent into invalid extension '_9XXXXXXX-CHANUNAVAIL' in context 'a_to_b', but no invalid handler [Kmndemo*CLI> < [ 02 01 5c 56 08 02 80 03 02 18 03 a9 83 92 ] < Informational frame: [Kmndemo*CLI> < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 046 0: 0 < N(R): 043 P: 0 < 10 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 42 to (but not including) 43 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= 2 (reference 3/0x3) (Terminator) < Message type: CALL PROCEEDING (2) < [18 03 a9 83 92] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 18 ] [Kmndemo*CLI> -- Making new call for cr 32771 -- Processing IE 24 (cs0, Channel Identification) -- Finally transmitting 43, since window opened up (0) [Kmndemo*CLI> > [ 00 01 56 5e 08 02 00 03 5a 08 02 81 d1 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 043 0: 0 > N(R): 047 P: 0 > 9 bytes of data Stopping T_203 timer Starting T_200 timer -- Restarting T200 timer [Kmndemo*CLI> > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 3/0x3) (Originator) > Message type: RELEASE COMPLETE (90) > [08 02 81 d1] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > Location: Private network serving the local user (1) > Ext: 1 Cause: Invalid call reference value (81), class = > Invalid message (e.g. parameter out of range) (5) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Restarting T203 timer [Kmndemo*CLI> < [ 00 01 01 58 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 044 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 42 to (but not including) 44 -- ACKing packet 43, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> -- Restarting T203 timer ----------------------------------------------------------------------- This is the working one: [Kmndemo*CLI> < [ 02 01 3a 3a 08 02 00 01 05 04 03 80 90 a2 18 03 a1 83 97 1c 18 9f 8b 01 00 a1 12 02 01 01 02 01 00 80 0a 47 45 49 53 2c 4a 45 52 52 59 1e 02 82 83 6c 0c 21 83 33 31 37 38 36 37 32 30 33 38 70 0b a1 33 31 37 35 36 36 31 36 37 37 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 029 0: 0 < N(R): 029 P: 0 < 72 bytes of data -- ACKing all packets from 28 to (but not including) 29 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=72 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: u-Law (34) < [18 03 a1 83 97] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 23 ] < [1c 18 9f 8b 01 00 a1 12 02 01 01 02 01 00 80 0a 47 45 49 53 2c 4a 45 52 52 59] < Facility (len=26, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x12, 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0A, 'GEIS,JERRY' ] PROTOCOL 1F 8B 0001 00 (CONTEXT SPECIFIC [11]) A1 0012 (CONTEXT SPECIFIC [1]) 02 0001 01 (INTEGER: 1) 02 0001 00 (INTEGER: 0) 80 000A 47 45 49 53 2C 4A 45 52 52 59 (CONTEXT SPECIFIC [0]) < [1e 02 82 83] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ] < [6c 0c 21 83 33 31 37 38 36 37 32 30 33 38] < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation allowed of network provided number (3) '3178672038' ] < [70 0b a1 33 31 37 35 36 36 31 36 37 37] < Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3175551212' ] -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 28 (cs0, Facility) Q.932 Interpretation component is not handled Handle Q.932 ROSE Invoke component [ Handling operation 0 ] Handle Name display operation Received caller name 'GEIS,JERRY' -- Processing IE 30 (cs0, Progress Indicator) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) q931.c:3296 q931_receive: call 1 on channel 23 enters state 6 (Call Present) Sending Receiver Ready (30) > [ 02 01 01 3c ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 030 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter q931.c:2570 q931_call_proceeding: call 1 on channel 23 enters state 9 (Incoming Call Proceeding) > [ 00 01 3a 3c 08 02 80 01 02 18 03 a9 83 97 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 029 0: 0 > N(R): 030 P: 0 > 10 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=10 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: CALL PROCEEDING (2) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive > Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ] -- Accepting call from '3178672038' to '3175551212' on channel 0/23, span 1 -- Executing [3175551...@smvoice-incoming:1] Dial("Zap/23-1", "SIP/a_to_b/3175551212") in new stack [Kmndemo*CLI> -- Called a_to_b/3175551212 [Kmndemo*CLI> < [ 00 01 01 3c ] < Supervisory frame: [Kmndemo*CLI> < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 030 P/F: 0 < 0 bytes of data -- ACKing all packets from 28 to (but not including) 30 -- ACKing packet 29, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter [Kmndemo*CLI> -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> -- SIP/a_to_b-17edc390 answered Zap/23-1 [Kmndemo*CLI> q931.c:2699 q931_connect: call 1 on channel 23 enters state 8 (Connect Request) [Kmndemo*CLI> > [ 00 01 3c 3c 08 02 80 01 07 18 03 a9 83 97 1e 02 81 82 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 030 0: 0 > N(R): 030 P: 0 > 14 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer [Kmndemo*CLI> > Protocol Discriminator: Q.931 (8) len=14 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: CONNECT (7) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive > Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ] > [1e 02 81 82] [Kmndemo*CLI> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment > is non-ISDN. (2) ] [Kmndemo*CLI> < [ 00 01 01 3e ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 031 P/F: 0 < 0 bytes of data -- ACKing all packets from 29 to (but not including) 31 [Kmndemo*CLI> -- ACKing packet 30, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 3c 3e 08 02 00 01 0f ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 030 0: 0 < N(R): 031 P: 0 < 5 bytes of data -- ACKing all packets from 30 to (but not including) 31 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: CONNECT ACKNOWLEDGE (15) q931.c:3454 q931_receive: call 1 on channel 23 enters state 10 (Active) Sending Receiver Ready (31) [Kmndemo*CLI> > [ 02 01 01 3e ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 031 P/F: 0 > 0 bytes of data -- Restarting T203 counter [Kmndemo*CLI> -- Restarting T203 counter [Kmndemo*CLI> T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (31) [Kmndemo*CLI> > [ 00 01 01 3f ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 031 P/F: 1 > 0 bytes of data -- Restarting T203 counter [Kmndemo*CLI> < [ 00 01 01 3f ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 031 P/F: 1 < 0 bytes of data -- ACKing all packets from 30 to (but not including) 31 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> -- Got RR response to our frame -- Restarting T203 counter [Kmndemo*CLI> [Oct 25 19:11:02] DTMF[8412]: channel.c:2262 __ast_read: DTMF end '2' received on Zap/23-1, duration 0 ms [Kmndemo*CLI> [Oct 25 19:11:02] DTMF[8412]: channel.c:2288 __ast_read: DTMF begin emulation of '2' with duration 100 queued on Zap/23-1 [Kmndemo*CLI> [Oct 25 19:11:02] DTMF[8412]: channel.c:2407 __ast_read: DTMF end emulation of '2' queued on Zap/23-1 [Kmndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> -- Executing [5068...@a_to_b:1] Set("SIP/a_to_b-17ee8f90", "CALLERID(number)=3175551212") in new stack [Kmndemo*CLI> -- Executing [5068...@a_to_b:2] Dial("SIP/a_to_b-17ee8f90", "Zap/g1/3175068000") in new stack [Kmndemo*CLI> -- Making new call for cr 32770 [Kmndemo*CLI> -- Requested transfer capability: 0x00 - SPEECH [Kmndemo*CLI> > [ 00 01 3e 3e 08 02 00 02 05 04 03 80 90 a2 18 03 a1 83 92 1e 02 80 83 28 0b > b1 47 45 49 53 2c 4a 45 52 52 59 6c 0c 21 80 33 31 37 35 36 36 31 36 37 37 70 > 0b a1 33 31 37 35 30 36 38 30 31 32 ] [Kmndemo*CLI> > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 031 0: 0 > N(R): 031 P: 0 > 59 bytes of data [Kmndemo*CLI> -- Restarting T203 counter [Kmndemo*CLI> Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=59 > Call Ref: len= 2 (reference 2/0x2) (Originator) > Message type: SETUP (5) [Kmndemo*CLI> > [04 03 80 90 a2] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: > Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode > (16) > Ext: 1 User information layer 1: u-Law (34) > [18 03 a1 83 92] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred > Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 18 ] > [1e 02 80 83] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: User (0) > Ext: 1 Progress Description: Calling equipment > is non-ISDN. (3) ] > [28 0b b1 47 45 49 53 2c 4a 45 52 52 59] > Display (len=11) Charset: 31 [ GEIS,JERRY ] > [6c 0c 21 80 33 31 37 35 36 36 31 36 37 37] > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number > not screened (0) '3175551212' ] > [70 0b a1 33 31 37 35 30 36 38 30 31 32] > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3175068000' ] q931.c:2879 q931_setup: call 32770 on channel 18 enters state 1 (Call Initiated) -- Called g1/3175068000 [Kmndemo*CLI> < [ 00 01 01 40 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 032 P/F: 0 < 0 bytes of data -- ACKing all packets from 30 to (but not including) 32 -- ACKing packet 31, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 3e 40 08 02 80 02 7d 08 03 82 e3 28 14 01 00 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 031 0: 0 < N(R): 032 P: 0 < 13 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: STATUS (125) < [08 03 82 e3 28] < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2) < Ext: 1 Cause: Info. element nonexist or not implemented (99), class = Protocol Error (e.g. unknown message) (6) ] < Cause data 1: 28 (40, Display IE) < [14 01 00] < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Null (0) -- Processing IE 8 (cs0, Cause) -- Processing IE 20 (cs0, Call State) [Kmndemo*CLI> Sending Receiver Ready (32) > [ 02 01 01 40 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 032 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 40 40 08 02 80 02 02 18 03 a9 83 92 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 032 0: 0 < N(R): 032 P: 0 < 10 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: CALL PROCEEDING (2) < [18 03 a9 83 92] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 18 ] -- Processing IE 24 (cs0, Channel Identification) q931.c:3426 q931_receive: call 32770 on channel 18 enters state 3 (Outgoing call Proceeding) Sending Receiver Ready (33) > [ 02 01 01 42 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 033 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (33) > [ 00 01 01 43 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 033 P/F: 1 > 0 bytes of data -- Restarting T203 counter [Kmndemo*CLI> -- Zap/18-1 is proceeding passing it to SIP/a_to_b-17ee8f90 [Kmndemo*CLI> < [ 00 01 01 41 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 032 P/F: 1 < 0 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 42 40 08 02 80 02 03 1e 02 82 88 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 033 0: 0 < N(R): 032 P: 0 < 9 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: PROGRESS (3) < [1e 02 82 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] -- Processing IE 30 (cs0, Progress Indicator) Sending Receiver Ready (34) > [ 02 01 01 44 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 034 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> -- Zap/18-1 is making progress passing it to SIP/a_to_b-17ee8f90 -- Zap/18-1 is making progress passing it to SIP/a_to_b-17ee8f90 [Kmndemo*CLI> < [ 02 01 44 40 08 02 80 02 01 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 034 0: 0 < N(R): 032 P: 0 < 5 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: ALERTING (1) q931.c:3341 q931_receive: call 32770 on channel 18 enters state 4 (Call Delivered) Sending Receiver Ready (35) > [ 02 01 01 46 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 035 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> -- Zap/18-1 is ringing [Kmndemo*CLI> T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (35) > [ 00 01 01 47 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 035 P/F: 1 > 0 bytes of data [Kmndemo*CLI> -- Restarting T203 counter [Kmndemo*CLI> < [ 00 01 01 41 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 032 P/F: 1 < 0 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 46 40 08 02 00 01 45 08 02 80 90 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 035 0: 0 < N(R): 032 P: 0 < 9 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: DISCONNECT (69) [Kmndemo*CLI> < [08 02 80 90] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Processing IE 8 (cs0, Cause) [Kmndemo*CLI> q931.c:3561 q931_receive: call 1 on channel 23 enters state 12 (Disconnect Indication) Sending Receiver Ready (36) > [ 02 01 01 48 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 [Kmndemo*CLI> > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 036 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter -- Channel 0/23, span 1 got hangup request, cause 16 [Kmndemo*CLI> == Spawn extension (smvoice-incoming, 3175551212, 1) exited non-zero on 'Zap/23-1' [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request [Kmndemo*CLI> q931.c:2715 q931_release: call 1 on channel 23 enters state 19 (Release Request) [Kmndemo*CLI> > [ 00 01 40 48 08 02 80 01 4d 08 02 81 90 ] [Kmndemo*CLI> > Informational frame: [Kmndemo*CLI> > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 032 0: 0 > N(R): 036 P: 0 > 9 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer [Kmndemo*CLI> > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE (77) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event > (1) ] [Kmndemo*CLI> -- Hungup 'Zap/23-1' [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate Call Received q931.c:2763 q931_disconnect: call 32770 on channel 18 enters state 11 (Disconnect Request) [Kmndemo*CLI> > [ 00 01 42 48 08 02 00 02 45 08 02 81 90 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 033 0: 0 > N(R): 036 P: 0 > 9 bytes of data T_200 timer already going (2) > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 2/0x2) (Originator) > Message type: DISCONNECT (69) > [08 02 81 90] [Kmndemo*CLI> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event > (1) ] [Kmndemo*CLI> -- Hungup 'Zap/18-1' [Kmndemo*CLI> == Spawn extension (a_to_b, 5068000, 2) exited non-zero on 'SIP/a_to_b-17ee8f90' [Kmndemo*CLI> < [ 00 01 01 42 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 033 P/F: 0 < 0 bytes of data -- ACKing all packets from 31 to (but not including) 33 -- ACKing packet 32, new txqueue is 33 (-1 means empty) -- Something left to transmit (33), restarting T200 counter [Kmndemo*CLI> < [ 00 01 01 44 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 034 P/F: 0 < 0 bytes of data -- ACKing all packets from 32 to (but not including) 34 -- ACKing packet 33, new txqueue is -1 (-1 means empty) [Kmndemo*CLI> -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 48 44 08 02 00 01 5a ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 036 0: 0 < N(R): 034 P: 0 < 5 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: RELEASE COMPLETE (90) [Kmndemo*CLI> q931.c:3501 q931_receive: call 1 on channel 23 enters state 0 (Null) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null Sending Receiver Ready (37) > [ 02 01 01 4a ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 [Kmndemo*CLI> > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 037 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 4a 44 08 02 80 02 4d ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 037 0: 0 < N(R): 034 P: 0 < 5 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: RELEASE (77) [Kmndemo*CLI> q931.c:3536 q931_receive: call 32770 on channel 18 enters state 0 (Null) Sending Receiver Ready (38) > [ 02 01 01 4c ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 038 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request > [ 00 01 44 4c 08 02 00 02 5a 08 02 81 90 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 034 0: 0 > N(R): 038 P: 0 > 9 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 2/0x2) (Originator) > Message type: RELEASE COMPLETE (90) > [08 02 81 90] [Kmndemo*CLI> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event > (1) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null [Kmndemo*CLI> < [ 00 01 01 46 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 035 P/F: 0 < 0 bytes of data -- ACKing all packets from 33 to (but not including) 35 -- ACKing packet 34, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> quit T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (38) [Kmndemo*CLI> quit > [ 00 01 01 4d ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 038 P/F: 1 > 0 bytes of data -- Restarting T203 counter [Kmndemo*CLI> quit < [ 00 01 01 47 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 035 P/F: 1 < 0 bytes of data -- ACKing all packets from 34 to (but not including) 35 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> quit -- Got RR response to our frame _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users