Hello all, I am new to asterisk and have spent a good 4 or 5 days trying to get things sorted out. I initially installed it in Fedora Core 11 and compiled mods + asterisk. After much problems, I went with asteriskNow. The biggest problem I am have is getting some kind of base configuration going. I have been all over Google, but what I oftwen find is conflicting or outdated information. Commands to use that no longer work because things have changed from zaptel to dahdi.
I have a TDM400P with 1 FXO module and 1 FXS module installed. The card is readily seen. I cannot get a dial tone (and I did plug in the power). And am unsure what to do. 1. /etc/init.d/asterisk does not exist, so I have no idea how the system is even starting. 2. The /etc/asterisk folder has zapata.conf.template AND chan_dahdi.conf.template. Which one am I supposed to use? Anyone want to take some pity? Just looking to get to the point of a dial tone. At least will know things are working. I can go on from there. But at this point I am stuck. Not trying to take the lazy way out, just trying to get a handle on this. BELIEVE ME I have put forth a GREAT deal of effort. Went to the irc channel and though there were some 200 users, most were prob just idleing. Been all over the forums. And every google "setup tdm400p asterisk" page that exists. Just want to plug in regular telephone, and dial out through my telephone company. Thanks ------------------------ dmesg ------------------------ Nov 8 00:01:37 localhost kernel: Module 0: Installed -- AUTO FXS/DPO Nov 8 00:01:37 localhost kernel: Module 1: Not installed Nov 8 00:01:37 localhost kernel: Module 2: Not installed Nov 8 00:01:37 localhost kernel: Module 3: Installed -- AUTO FXO (FCC mode) Nov 8 00:01:37 localhost kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (2 modules) Nov 8 00:01:37 localhost kernel: dahdi_transcode: Loaded. ---------------------------------- dahdi_cfg -vv ---------------------------------- DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0.2 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) 2 channels to configure. Setting echocan for channel 1 to mg2 Setting echocan for channel 4 to mg2 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users