2009/11/12 Tzafrir Cohen <tzafrir.co...@xorcom.com>
> On Thu, Nov 12, 2009 at 01:43:48PM +0100, Olivier wrote:
> > 2009/11/11 Tzafrir Cohen <tzafrir.co...@xorcom.com>
> >
> > > On Wed, Nov 11, 2009 at 08:24:53PM +0100, Olivier wrote:
>
> > > > What about adding per-span section headers like Asterisk .conf files
> ?
> > > > [span1]
> > > > group_lines 1
> > > > pri_termtype
> > > > SPAN/1 TE
> > > > SPAN/2 TE
> > > >
> > > > [span2]
> > > > group_lines 2
> > > > pri_termtype
> > > > SPAN/2 TE
> > >
> > > This implies you will know span numbers in advance. I would like better
> > > ways to specify configuration.
> > >
> >
> > Really ?
> > I used this [span1] header as an example. Using any other string would be
> > fine for me as what matters, if I'm not mistaken, is the group_lines
> number
> > :
> >
> > [foo]
> > group_lines 1
> > pri_termtype
> > SPAN/1 TE
> > SPAN/2 TE
> >
> > [bar]
> > group_lines 2
>
> How can you tell which spans / channels will use each section?
>
My understanding of Dahdi is that I mostly need a group number to use with
Dial application :
Dial(DAHDI/g1/0123456789).
To get that dahdi-channels.conf file generated with dahdi_genconf, the only
missing feature (if my understanding is correct) is to be able to group
together a couple of ports so that I could either include in my diaplans,
lines such as Dial(DAHDI/g1/0123456789) or Dial(DAHDI/g2/9876543210).
So with a /etc/dahdi/genconf_parameters like this ...
[foo]
group_lines 1
pri_termtype
SPAN/1 TE
[bar]
group_lines 2
pri_termtype
SPAN/2 TE
... I think we've got everything needed to generate a
/etc/asterisk/dahdi-channels.conf file this :
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=1,11
context=remote
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
group=2,12
context=remote
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5
context = default
group = 63
So I don't understand where I would have to "tell which spans / channels
will use each section". The only purpose of sections within
genconf_parameters is to set the scope of parameters like group_lines.
Am I correct to think I can't today generate
/etc/asterisk/dahdi-channels.conf files in which 2 groups of BRI ports are
defined ?
>
> --
> Tzafrir Cohen
> icq#16849755
> jabber:tzafrir.co...@xorcom.com<jabber%3atzafrir.co...@xorcom.com>
> +972-50-7952406 mailto:tzafrir.co...@xorcom.com
> http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
