thanks all for your help, I really appreciate. now it's working
My problem was due to Nov 27 12:56:28 trixbox1 snmpd[5743]: /etc/snmp/snmpd.conf: line 61: Error: example config COMMUNITY not properly configured Nov 27 12:56:28 trixbox1 snmpd[5743]: /etc/snmp/snmpd.conf: line 62: Error: example config NETWORK not properly configured with the link michal gave to me I succeed in getting asterisk working regards Mickael 2009/11/27 Lee Archer <lee.arc...@thebigword.com> > I use CentOS, and it works fairly well. But I had to piece together > info from several places. I've tried it several different wants and this > way worked, as long as asterisk is run as root. > > > > Copy asterisk-mib.txt and digium-mib.txt from <asterisk_source>/doc to > /usr/share/snmp/mibs/ > > > > mkdir /var/agentx > > touch /var/agentx/master > > > > My /etc/asterisk/res_snmp.conf > > > > ; > > ; Configuration file for res_snmp > > ; > > > > [general] > > ; We run as a subagent per default -- to run as a full agent > > ; we must run as root (to be able to bind to port 161) > > ;subagent = yes > > ; SNMP must be explicitly enabled to be active > > enabled = yes > > > > My snmp.conf > > > > rwcommunity private 127.0.0.1 > > rocommunity public > > disk / > > master agentx > > agentXperms 0660 0550 root root > > > > restart snmp and the /var/agentx/master should look like srw-rw---- 1 root > root 0 Nov 25 11:31 /var/agentx/master > > > > restart asterisk manually and you see a net-snmp connect. > > > > export MIBS=+ASTERISK-MIB > > > > You should be able to to do a snmpwalk -v 2c -c public localhost asterisk > > > > Regards > > > > Lee > > > > *From:* asterisk-users-boun...@lists.digium.com [mailto: > asterisk-users-boun...@lists.digium.com] *On Behalf Of *mickael ropars > *Sent:* 27 November 2009 11:58 > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users] ASTERISK and SNMP > > > > Michal > > please wait I found some issues in my con file > > 2009/11/27 mickael ropars <mrop...@gmail.com> > > I am running on Trixbox so my OS is Cent0S 5.4 and the Asterisk version is > 1.4.22-4 > > on asterisk side Snmp module is running: > > > module load res_snmp.so > == Parsing '/etc/asterisk/res_snmp.conf': Found > Loading [Sub]Agent Module > Loaded res_snmp.so => (SNMP [Sub]Agent for Asterisk) > > see below my snmpd.conf file (I remove commented line for an easy reading) > > regards > > Mickael > > > > > > ############################################################################### > # Access Control > > ############################################################################### > > #### > # First, map the community name (COMMUNITY) into a security name > # (local and mynetwork, depending on where the request is coming > # from): > > # sec.name source community > com2sec local localhost COMMUNITY > com2sec mynetwork NETWORK/24 COMMUNITY > > > rwcommunity local > rocommunity local > > #### > # Second, map the security names into group names: > > # sec.model sec.name > group MyRWGroup v1 local > group MyRWGroup v2c local > group MyRWGroup usm local > group MyROGroup v1 mynetwork > group MyROGroup v2c mynetwork > group MyROGroup usm mynetwork > > #### > # Third, create a view for us to let the groups have rights to: > > # incl/excl subtree mask > view all included .1 80 > > #### > # Finally, grant the 2 groups access to the 1 view with different > # write permissions: > > # context sec.model sec.level match read write notif > access MyROGroup "" any noauth exact all none none > access MyRWGroup "" any noauth exact all all none > > > > ############################################################################### > # System contact information > # > > syslocation Right here, right now. > syscontact Me <m...@somewhere.org> > > > > > ############################################################################### > # Process checks. > # > # Make sure mountd is running > proc mountd > > # Make sure there are no more than 4 ntalkds running, but 0 is ok too. > proc ntalkd 4 > > # Make sure at least one sendmail, but less than or equal to 10 are > running. > proc sendmail 10 1 > > > > ############################################################################### > # Executables/scripts > # > > # a simple hello world > exec echotest /bin/echo hello world > > > ############################################################################### > # disk checks > # > > disk / 10000 > > > > ############################################################################### > # load average checks > # > > # Check for loads: > load 12 14 14 > > > > ############################################################################### > # Extensible sections. > # > > > > > ############################################################################### > # Pass through control. > # > > > ############################################################################### > # Subagent control > > > # > > master agentx > agentXperms 0660 0550 nobody asterisk > SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master" > mibs +ASTERISK-MIB > > > ############################################################################### > # Further Information > > > > > > 2009/11/27 michal kalinowski <michal.kalinow...@interia.pl> > > What operating system do You have ? What asterisk version You compile ? > After install net-snmp do You recompile asterisk with res_snmp module ? > > I'm used instruction from here > http://voxilla.com/2009/02/03/configuring-asterisk-snmp-support-1131 > and everything work correctly. > > BR, > Michał > W dniu 27 listopada 2009 11:18 użytkownik mickael ropars > <mrop...@gmail.com> napisał: > > > Hi Michal, > > > > thanks a lot for you quick answer I appreciate. > > > > I run your commands and I have the following answer > > > > [localhost snmp]# snmpwalk -c local -v 1 localhost asterisk > > no answer > > > > [localhost snmp]# snmpwalk -c local -v 2c localhost asterisk > > ASTERISK-MIB::asterisk = No Such Object available on this agent at this > OID > > > > > > since I don't know well snmp what's going wrong ? > > > > regards > > > > Mickael > > > > > > > > 2009/11/27 michal kalinowski <michal.kalinow...@interia.pl> > >> > >> Hello Mickael > >> > >> Here You have the snmpd.conf file > >> > >> cat /etc/snmp/snmpd.conf > >> rocommunity your_community > >> master agentx > >> agentXperms 0660 0550 nobody asterisk > >> SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master" > >> mibs +ASTERISK-MIB > >> > >> and also you need create file /etc/snmp/snmp.conf with following entry > >> "mibs +ASTERISK-MIB" > >> > >> cat /etc/snmp/snmp.conf > >> mibs +ASTERISK-MIB > >> > >> Next use command "snmpwalk -c your_community -v 1 localhost asterisk" > >> to check is everything correct. > >> > >> > >> > >> Michał > >> > >> 2009/11/27 mickael ropars <mrop...@gmail.com>: > >> > Hi all, > >> > > >> > I am currently not able to configure SNMP for asterisk, but I am not > >> > able to > >> > acess to the asterisk MIB (the asterisk MIB is in > /usr/share/snmp/mibs/) > >> > > >> > > >> > Does somebody has an example of smnpd.conf file wich is working ? > >> > > >> > regards > >> > > >> > Mickael > >> > > >> > _______________________________________________ > >> > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > > >> > asterisk-users mailing list > >> > To UNSUBSCRIBE or update options visit: > >> > http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > >> > >> _______________________________________________ > >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users