Dear All,
I have been using Asterisk "10
days ago" version loaded onto my Redhat 7.3 with kernel 2.4.18-3 running
Jeremy's h323 driver. It has been running okay with a bit of problems, like
system crashing after certain period of time with 15 simultaneous calls or so.
I have tried to load up the
current version today again (0.7.1 I guess) and apparently with the new H323
driver as well. I have recompiled the H323 libraries with version Pwlib1.5.2 and
Openh3231.12.2 as recommended. However, no call was able to get through at all.
I have tried this before when 0.7.0 came out when had the same result, I thought
there were bugs, but now I am getting the same thing. I have tried using the
same h323.conf configuration as well as trying to change a couple of
faststart.....parameters, but same result.
Is there anyone who has had
good experience with the new version of Asterisk 0.7.1 with the most current
Jeremy H323 driver?
Please suggest,
thanks
Tom
|
Title: RE: [Asterisk-Users] capacity testing
- RE: [Asterisk-Users] RE: PID T. Chan
- Re: [Asterisk-Users] RE: PID asterisk
- RE: [Asterisk-Users] RE: PID T. Chan
- Re: [Asterisk-Users] capacity testing Jeremy McNamara
- RE: [Asterisk-Users] capacity testing Jesse Peterson
- RE: [Asterisk-Users] capacity testing Jesse Peterson
- RE: [Asterisk-Users] capacity testing Jesse Peterson
- RE: [Asterisk-Users] capacity testing Jesse Peterson
- RE: [Asterisk-Users] capacity testing T. Chan
- T. Chan