I have also been trying to research this exact same problem, but as yet have not had much luck!
I'm hoping there is a solution, as at the moment, it makes transfering calls to another PBX user impossible. Let me know if you find a solution! Cheers, Steven This is what DUSTIN WILDES at Sun, Jan 18, 2004 at 11:55:03PM -0500 wrote: > Hello all! > > I have an FXO port on a cisco router that is directly connected to our PBX. > Our ATA-186 (firmware version 3) registers with asterisk, which connects to our > cisco router's fxo port to give me a dialtone on our PBX from the ATA. > > How do I pass the flash button to the PBX? It seems the ATA-186 wants to control > the flash by putting my first call on hold and prompts me to dial another extension. > DTMF is fine, just can't use the native Flash functions of our PBX with the ATA-186 > and asterisk. > > Anyone done this or know which direction to go? > I've tried changing the audiomode options, but nothing helped or I didn't get the > right hex-to-binary conversion right. > > > Any help would be greatly appreciated! > Thanks!! > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users