Hi,(posting again as my previous log attachments were too large. Sorry if this should end up as a double posting.)
On 12/14/2009 09:31 PM, Tzafrir Cohen wrote:
On Mon, Dec 14, 2009 at 05:52:40PM +0100, Christian Theune wrote:Hi there, I just upgraded a relatively old Asterisk installation (1.2) in our office to a relatively new version (1.6svn from last wednesday) which runs a Junghans QuadBRI card [1]. To get this flying I got dahdi-linux, dahdi-tools and libpri from SVN as well. After a while of juggling it "works". What doesn't work: connected ISDN devices (Gigaset phones connected to QuadBRI with a port in NT mode, signalling via bri_net_ptmp) can not transfer calls by pressing "#". SIP phones can. I'm at a point where I can't even get *any* output to debug.Is overlap dialing used?
Yes and no: I retried with overlap dialing disabled (overlapdial=no in chan_dahdi.conf) but that didn't change anything.
Wher ecan we see your pri debug trace?
I attached a sanitized version. The incoming number is me calling from my mobile phone through the trunk (DAHDI/g1) to one of the DECT handsets (DAHDI/g4).
Also, find the chan_dahdi.conf attached. Christian -- Christian Theune · c...@gocept.com gocept gmbh & co. kg · forsterstraße 29 · 06112 halle (saale) · germany http://gocept.com · tel +49 345 1229889 0 · fax +49 345 1229889 1 Zope and Plone consulting and development
chan_dahdi.conf.gz
Description: application/gzip
pridebug.log.gz
Description: application/gzip
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users