The web interface is a bit confusing at first. Here are some of the steps that I remember off hand. Change as little as possible, makes it easier to troubleshoot later.
Get the latest code from your vendor (5.6 is what I run) Configure the proxy to register with Configuration -> Protocol Config -> Protocol Def -> Proxy and Registration - Enable registration - Set the registration per endpoint Configure your call routing Configuration -> Protocol Config -> Routing Tables -> IP to Trunk Group If you send a prefix for outgoing calls, you will need to configure that in the manipulation table too Configuration -> Protocol Config -> Manipulation tables -> Dest number IP to Tel Configure authentication Configuration -> Protocol Config -> Endpoint settings -> Authentication Now the part that took me a while to find... Configure the Channel to phone number mapping: Configuration -> Protocol Config -> Endpoint Number -> EndPoint Phone Number Configure the Hunt group settings Configuration -> Protocol Config -> Hunt/IP Group -> Hunt group settings Hope that helps. These are great devices, once you figure out how to get them configured... -Jonathan On Sat, Dec 26, 2009 at 11:39 PM, Joseph <syscon...@gmail.com> wrote: > I have AudioCodes MP-2FXO/2FXS but have a problem registering it with > Asterisk. > Any links or pointers to configuration how it is done? > > -- > Joseph > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users