Ok, the problem solved...

thanks for your advice.

after rebooting i run /usr/share/dahdi/xpp_fxloader load
and everything run normally.

thanks...

> Message: 24
> Date: Mon, 1 Feb 2010 11:03:44 +0200
> From: Tzafrir Cohen <tzafrir.co...@xorcom.com>
> Subject: Re: [asterisk-users] Astribank problem
> To: asterisk-users@lists.digium.com
> Message-ID: <20100201090344.gr3...@xorcom.com>
> Content-Type: text/plain; charset=us-ascii
> 
> On Mon, Feb 01, 2010 at 07:42:51AM +0000, frangky robert wrote:
> > 
> > 
> > 
> > 
> > I do some test:
> > 1.unplug usb connector from server to astricon
> > 2.unplug power to astricon
> > 3.plug-in the power to astricon
> > 4.plug-in the usb connector
> > 
> > Here is the log from /var/log/messages after doing the 1st step.
> > 
> > Feb  1 19:38:24 localhost last message repeated 2 times
> > Feb  1 19:43:39 localhost kernel: ERR-xpp_usb: xusb-0 (usb-0000:00:1d.7-3) 
> > [X1038295]: nonzero write bulk status received: -71 (pending_writes=1)
> > Feb  1 19:43:39 localhost kernel: usb 2-3: USB disconnect, address 3
> > Feb  1 19:43:39 localhost kernel: ERR-xpp_usb: XBUS-00: xusb_listen: 
> > usb_submit_urb failed: -19
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00: [usb:X1038295] 
> > Disconnecting
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00: [usb:X1038295] 
> > Deactivating
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00: [usb:X1038295] Release 
> > XPDS
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00/XPD-00: Remove
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00/XPD-10: Remove
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00/XPD-20: Remove
> > Feb  1 19:43:39 localhost kernel: NOTICE-xpp: worker_reset: 
> > worker(XBUS-00)->xpds_init_done=0
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00: [usb:X1038295] 
> > Atribank Remove
> > Feb  1 19:43:39 localhost kernel: INFO-xpp: XBUS-00: [usb:X1038295] 
> > Astribank Release
> > Feb  1 19:43:39 localhost kernel: INFO-xpp_usb: xusb-0 (usb-0000:00:1d.7-3) 
> > [X1038295]: now disconnected
> > Feb  1 19:43:39 localhost 'astribank_hook'[3728]: offline(XBUS-00): 0/1 
> > from /etc/dahdi/xpp_order
> > Feb  1 19:43:39 localhost 'astribank_hook'[3735]: All Astribanks offline
> > 
> > 
> > And, this is the log after doing 4th step.
> > 
> > Feb  1 19:44:20 localhost kernel: usb 2-3: new high speed USB device using 
> > ehci_hcd and address 4
> > Feb  1 19:44:20 localhost kernel: usb 2-3: configuration #1 chosen from 1 
> > choice
> > Feb  1 19:44:21 localhost 'xpp_fxloader'[3847]: Exiting... 
> > XPP_HOTPLUG_DISABLED
> 
> Seems like you explicitly disabled firmware loading by setting
> XPP_HOTPLUG_DISABLED in /etc/dahdi/init.conf . Just rem-out that line.
> 
> > 
> > lsusb result is:
> > 
> > [r...@localhost ~]# lsusb
> > Bus 002 Device 004: ID e4e4:1160
> > Bus 002 Device 001: ID 0000:0000
> > Bus 006 Device 001: ID 0000:0000
> > Bus 006 Device 002: ID 04b3:3025 IBM Corp.
> > Bus 004 Device 001: ID 0000:0000
> > Bus 008 Device 001: ID 0000:0000
> > Bus 007 Device 001: ID 0000:0000
> > Bus 001 Device 001: ID 0000:0000
> > Bus 005 Device 001: ID 0000:0000
> > Bus 003 Device 001: ID 0000:0000
> > 
> > here is the msg when i do /usr/share/dahdi/xpp_fxloader
> > [r...@localhost ~]# /usr/share/dahdi/xpp_fxloader usb
> 
> This only runs USB firmware loading. And as the firmware loading is
> explicitly disabled on your system, the FPGA firmware will still not get
> loaded.
> 
> This is also something that you would have seen if you would run
> 'dahdi_hardware -v'
> 
> So basically just remove that line from init.conf and replug the
> Astribank.
> 
> -- 
>                Tzafrir Cohen
> icq#16849755              jabber:tzafrir.co...@xorcom.com
> +972-50-7952406           mailto:tzafrir.co...@xorcom.com
> http://www.xorcom.com  iax:gu...@local.xorcom.com/tzafrir
> 
> 
> 
> *********************************************
                                          
_________________________________________________________________
New Windows 7: Find the right PC for you. Learn more.
http://windows.microsoft.com/shop
-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to