Hi All, Finally I am able to get the number displayed at the SIP side using
exten => _988.,1,Set(CALLERID(num)=8001234000) exten => _988.,n,Dial(DAHDI/g1/${EXTEN},20) However this number is fixed and I want to display the number of the individual lines whoever is calling. I tried with exten => _988.,1,Set(CALLERID(num)=${exten}) and exten => _988.,1,Set(CALLERID(num)=${EXTEN}) Both the above lines didn't help. I have 8 lines configured as below and need the callerID of the individual lines to be displayed at the SIP side exten => 8001234001,n,Dial(DAHDI/32,,rt) exten => 8001234002,n,Dial(DAHDI/33,,rt) exten => 8001234003,n,Dial(DAHDI/34,,rt) exten => 8001234004,n,Dial(DAHDI/35,,rt) exten => 8001234005,n,Dial(DAHDI/36,,rt) exten => 8001234006,n,Dial(DAHDI/37,,rt) exten => 8001234007,n,Dial(DAHDI/38,,rt) exten => 8001234008,n,Dial(DAHDI/39,,rt) Warm Regards Warm Regards Venugopal G HNM-SO WiMAX CPE VoIP IOT Team Cell : +91-99723-99437 ************************************************************************ ************************************************************************ ************************************************* ________________________________ From: Gopalakrishnaiyer Venugopal-Q16770 Sent: Thursday, March 04, 2010 6:36 PM To: Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] Caller ID in Asterisk Hi Jimmy, Appreciate your help. I tried the one below and cudnt get the caller ID.I am getting "Private Call" and "Out of Area" in the sip phone display when i call from asterisk. My current extensions.conf looks like below [general] static=yes writeprotect=no autofallthrough=no extenpatternmatchnew=no clearglobalvars=no priorityjumping=yes userscontext=default [globals] CONSOLE=Console/dsp ; Console interface for demo ;CONSOLE=DAHDI/1 ;CONSOLE=Phone/phone0 IAXINFO=guest ; IAXtel username/password ;IAXINFO=myuser:mypass TRUNK=DAHDI/G1 TRUNKMSD=1 [Internal] include => Incoming exten => 8001234001,1,Dial(DAHDI/32,,rt) exten => 8001234002,1,Dial(DAHDI/33,,rt) exten => 8001234003,1,Dial(DAHDI/34,,rt) exten => 8001234004,1,Set(CALLERID(num)=8001234004) exten => 8001234004,n,Set(CALLERID(name)="Line 4") exten => 8001234004,3,Dial(DAHDI/35,,rt) exten => 8001234005,1,Dial(DAHDI/36,,rt) [Incoming] exten => s,1,Answer exten => s,2,Dial(DAHDI/g1,20,rt) exten => _988.,1,Dial(DAHDI/g1/${EXTEN},20) I also tried changing the dial plan to exten => _988.,3,Dial(DAHDI/g1/${EXTEN},20) and in that case the call itself was not going through Venugopal ________________________________ From: asterisk-users-boun...@lists.digium.com on behalf of Jimmy Godbout Sent: Thu 3/4/2010 5:53 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Caller ID in Asterisk Hi, You need to set the callerid before making the call, not after. Also, I guess it's a typo that the priority in this dialplan is all 1; it should be exten => 8001234003,1,Set(CALLERID(num)=8001234003) exten => 8001234003,n,Set(CALLERID(name)="Line 5") exten => 8001234003,n,Dial(DAHDI/34,,rt) Unless your using variable for the name and the number, you should not put them in ${}. Jimmy -----Original Message----- From: venui...@motorola.com Sent: Thu, 4 Mar 2010 19:50:03 +0800 To: asterisk-users@lists.digium.com, asterisk-users@lists.digium.com, asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Caller ID in Asterisk HI All, Below is the ones i tried exten => 8001234003,1,Dial(DAHDI/34,,rt) exten => 8001234003,1,Set(CALLERID(num)=${8001234003}) exten => 8001234003,1,Set(CALLERID(name)=${Line 5}) However i got an error message sayinfg Function CallerID not registered. Kindly help me... ________________________________ From: asterisk-users-boun...@lists.digium.com on behalf of Gopalakrishnaiyer Venugopal-Q16770 Sent: Thu 3/4/2010 3:59 PM To: Asterisk Users Mailing List - Non-Commercial Discussion; asterisk-users@lists.digium.com Subject: [asterisk-users] Caller ID in Asterisk Hi All, I have an asterik machine which is connected via a PRI to the SIP server.When i call from the Asterisk machine to the SIP server i am not getting the caller id of the lines at the sip side. Please help me to identify how this can be set.The extensions.conf file is attached. Cheers venu ________________________________ Email Notifier Preview <http://www.inbox.com/notifier> Receive Notifications of Incoming Messages Easily monitor multiple email accounts & access them with a click. Visit www.inbox.com/notifier and check it out!
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users