chan_dahdi.conf: ================================================= ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit ;autogenrated on 2009-12-04 ;Dahdi Channels Configurations ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no relaxdtmf=yes rxgain=3.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A108 port 1 [slot:4 bus:8 span:1] <wanpipe1> switchtype=national context=from-xo-nvfleetone3 group=2 echocancel=yes signalling=pri_cpe channel =>1-23 ;Sangoma A108 port 2 [slot:4 bus:8 span:2] <wanpipe2> context=from-xo-transp154760dl group=1 echocancel=yes signalling=em_w channel => 25-48 /etc/dahdi/system.conf ===================================================== #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit #autogenrated on 2009-12-04 #Dahdi Channels Configurations #For detailed Dahdi options, view /etc/dahdi/system.conf.bak loadzone=us defaultzone=us #Sangoma A108 port 1 [slot:4 bus:8 span:1] <wanpipe1> span=1,0,0,esf,b8zs bchan=1-23 echocanceller=mg2,1-23 hardhdlc=24 #Sangoma A108 port 2 [slot:4 bus:8 span:2] <wanpipe2> span=2,0,0,esf,b8zs e&m=25-48 echocanceller=mg2,25-48
________________________________ From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Friday, March 26, 2010 9:25 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Not hearing Telco Operator messages Can you post your /etc/zaptel.conf and /etc/asterisk/zapata.conf. -- Zeeshan On 2010-03-26 9:06 AM, "Robert Grignon" <rgrig...@fleetone.com> wrote: I have 1 PRI and 1 E&M Wink Circuit. If I call a non working number and route it through the PRI, I get the following: <Ringing>...."You have reached a non-working number....." If I call a non working number and route it through the E&M Wink Circuit, I get the following: <NO RINGING... DEAD AIR> A core show channels shows the state as ringing... Is there something I have to do to get the "You have reached a non-working number....." message to play back? Thanks, Robert -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users