Daniel, you are having a problem often seen in pre 1.4.14 versions. Before this release srvlookup=no was the default for sip.conf and guess the same for iax.conf . So if you are working with a previous release just add this parameter ...... but change it to
serverlookup=yes under your iax.conf [general] section. Alyed 2010/4/10 Daniel Bareiro <daniel-lis...@gmx.net> > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi all! > > I'm trying to test with a friend who has an Asterisk in his office with > the Asterisk which I have in my house. Then I have an extension that he > is trying to register remotely. > > Trying with the Twinkle client, I see that it is registered: > > - > --------------------------------------------------------------------------- > 400/400 190.0.163.57 D N 5060 OK (35 ms) > - > --------------------------------------------------------------------------- > > but to the few seconds I obtain the following thing in Asterisk CLI: > > - > --------------------------------------------------------------------------- > 400/400 190.0.163.57 D N 5060 UNREACHABLE > - > --------------------------------------------------------------------------- > > And Twinkle gives an error "408 request timeout". And when he tries to > make the register through his Asterisk instead of use Twinkle, after a > little while he obtains errors of this type: > > - > --------------------------------------------------------------------------- > [Apr 10 19:07:18] NOTICE[16848]: chan_sip.c:7618 sip_reg_timeout: -- > Registration for '4...@myremotehome.com' timed out, trying again > (Attempt #138) > - > --------------------------------------------------------------------------- > > This is the configuration that I'm using for the extension: > > - > --------------------------------------------------------------------------- > [400] > username=400 > type=friend > secret=passwd > qualify=yes > callerid="Daniel" <400> > host=dynamic > nat=no > context=from-internal > mailbox=...@voicemail > canreinvite=no > - > --------------------------------------------------------------------------- > > I tried with both "nat=yes" ---as it is possible to be observed above--- > and "nat=no", and we always obtain the same behavior. My Asterisk server > is installed in the same firewall with GNU/Linux. > > I don't believe that it is a problem with the ports since the client > registers itself at some time. Whatever happens, I'm allowing > connections for the remote IP to the 5060 tcp/UDP port and 10000:20000 > UDP in the firewall. The router that it is ahead has these ports > redirected to the firewall. > > Also I'm using externhost, externip and localnet in > /etc/asterisk/sip.conf > > > Which can be the problem? > > Thanks in advance for your reply. > > Regards, > Daniel > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.9 (GNU/Linux) > > iEYEARECAAYFAkvBAFQACgkQZpa/GxTmHTe0mgCcCmDNhkMm3DMc/Ckd7AAzZneF > 4ngAn0SL/IC58kNDktcRsxJOaKPoAuCL > =Ve4J > -----END PGP SIGNATURE----- > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users