Problem resolved with setting transfer=no in zapata.conf. On Mon, Apr 12, 2010 at 9:14 PM, bruce bruce <bruceb...@gmail.com> wrote:
> Hi Guys, > > I am sorry if my issue is not related to this but I think it is. > > I have a PRI with Bell Canada and when I dial in and have the call > transfered to a context to dial out and then have those two channels > bridged, the call disconnects with cause 16 just exactly as Jay R. Ashworth > shows in his CLI output. Bell Canada support RLT or know as 2BCT or TBCT to > some but we have not requested that feature. However, we don't care to keep > two channels tied up. Is this not possible through PRI? > > [zap_bridge] > exten => s,1,answer > exten => s,n,Dial(ZAP/g0/4167778888) > > If incoming leg of call is through PRI and outgoing leg is through SIP or > analogue ZAP everything works just fine. But the moment Call comes in > through PRI and goes out through PRI both channels drop. I should say that > call rings the 2nd party and 2nd party sees Caller ID info and when they > press Talk then there is the busy signal. I can post all the debug and bore > you with it but maybe someone already knows the answer. > > I have been looking for this for couple of days now and I don't seem to get > anywhere with answers. > > Input is much appreciated. > Bruce >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users