Unfortunately no, it did not solve my problem, the sitation is the same. Any other hint?
Best regards, Peter Gelencser 2010.05.01. 9:38 keltezéssel, Rudi Oosthuizen írta: > Had a similar problem with a B410p BRI card. Had to enable (or disable) > the 100ohms termination jumper on the card, because the telco provider > uses different exchanges ( Maybe someone can give more clarity on this?) > > Maybe it’s the same problem, enabling resolved my issue. > > Grep chan_dahdi /var/log/asterisk/full | grep –i “pri got event” should > also give indication off errors on the line from the telco side, if > cleared should be no errors. > > Rudi Oosthuizen > > Ø Hi, > > Ø I have a B400P BRI card with point-to-point connection (signalling: > > Ø bri_cpe) with this dmesg: http://pastebin.com/sXrRt1yM > > Ø When i restart asterisk server, the card cannot connect to the telco, > the control led flashes red. If I unplug the cable between the ISDN nt > and the card and wait 40 sec, the card can connect and works properly. > > Ø The telco says the asterisk crashes the connection with the telco, > when I let the NT reconnect, the card connects properly. > > Ø Do you have any idea how to solve this problem? Thanks for any help in > advance. > > Ø Best regards, > > Ø Peter Gelencser > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users