Samuel Jimenez wrote:
Hi,Hi Sam,
Assuming that the problem *is not* soft settings I would recommend you to
verify that the channel mapping is the same in your adapter as in your
E100P. Some times they do not match, and the D channel does not arrive
where expected at each end.
My problem was a cross-cable. Now it is ok. Thanks
Daniel
As you said, just a clue.
Rgds
Sam\\\
----- Original Message ----- From: "Daniel Bichara" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, January 22, 2004 1:38 PM
Subject: [Asterisk-Users] ETSI PRI ISDN Signalling
> Hi All, > > I've bought a R2Adapter to convert R2Digital to ISDN. I am trying to > config E100P card but D-Channel is down. I know R2Adapter uses ETSI ISDN > Protocol so I tried unsucessfully setup switchtype to EuroISDN. Any clue? > > Daniel > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users