i am using asterisk 1.6.2 with mISDN and a passive AVM Fritz!card on CentOS 5.5. The only thing, i want to do is a call-redirection from an isdn-call to my mobile via sip-account.
My extension conf is: general] static=yes writeprotect=no [globals] OUT_PORT=1 [ISDN] exten => 12345,1,Dial(SIP/012346737...@sipprovider.local) If i call to the msn 12345, the SIP-call is going out, but after a second the call is stopped. What is wrong, with my configuration? Kernel show Jun 10 20:48:58 wolf kernel: hdlc_down unknown prim(280) Jun 10 20:49:04 wolf kernel: MDL_ERROR|REQ (tei_l2) Asterisk shows: P[ 1] MGMT: SSTATUS: L1_ACTIVATED P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082 P[ 1] channel with stid:0 not in use! P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582 P[ 1] set_channel: bc->channel:0 channel:1 P[ 1] I IND :NEW_CHANNEL oad:xxx dad:12345 pid:2 state:none P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad: P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0 P[ 1] --> caps:Speech pi:0 keypad: sending_complete:1 P[ 1] --> screen:0 --> pres:0 P[ 1] --> addr:0 l3id:20007 b_stid:0 layer_id:0 P[ 1] --> facility:Fac_None out_facility:Fac_None P[ 1] --> bc_state:BCHAN_CLEANED P[ 1] Chan not existing at the moment bc->l3id:20007 bc:0x8721e9c event:NEW_CHANNEL port:1 channel:1 P[ 1] NO USERUESRINFO P[ 1] --> found chan (preselected): 1 P[ 1] set_chan_in_stack: 1 P[ 1] setup_bc: with dsp P[ 1] --> Channel is 1 P[ 1] --> TRANSPARENT Mode P[ 1] I IND :SETUP oad:xxx dad:12345 pid:2 state:none P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad: P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0 P[ 1] --> caps:Speech pi:0 keypad: sending_complete:1 P[ 1] --> screen:0 --> pres:0 P[ 1] --> addr:50010102 l3id:20007 b_stid:10010100 layer_id:50010180 P[ 1] --> facility:Fac_None out_facility:Fac_None P[ 1] --> bc_state:BCHAN_ACTIVATED P[ 1] --> Bearer: Speech P[ 1] --> Codec: Alaw P[ 0] --> * NEW CHANNEL dad:12345 oad:xxx P[ 1] read_config: Getting Config P[ 1] --> CTON: Unknown P[ 1] --> EXPORT_PID: pid:2 P[ 1] --> PRES: Allowed (0) P[ 1] --> SCREEN: Unscreened (0) P[ 1] * Queuing chan 0x89e5410 P[ 1] I SEND:RELEASE oad:xxx dad:12345 pid:2 P[ 1] --> bc_state:BCHAN_ACTIVATED P[ 1] --> channel:1 mode:TE cause:16 ocause:1 rad: cad: P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0 P[ 1] --> caps:Speech pi:0 keypad: sending_complete:1 P[ 1] --> screen:0 --> pres:0 P[ 1] --> addr:50010102 l3id:20007 b_stid:10010100 layer_id:50010180 P[ 1] --> facility:Fac_None out_facility:Fac_None P[ 1] GOT SETUP OK P[ 1] Sending msg, prim:34d80 addr:41000104 dinfo:20007 P[ 1] BCHAN: bchan ACT Confirm pid:2 P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182 P[ 1] --> lib: RELEASE_CR Ind with l3id:20007 P[ 1] --> lib: CLEANING UP l3id: 20007 P[ 1] --> hangup P[ 1] * IND : HANGUP pid:2 ctx:ISDN dad:12345 oad:xxxx State:EXTCANTMATCH P[ 1] --> l3id:20007 P[ 1] --> cause:16 P[ 1] --> out_cause:16 P[ 1] --> Channel: mISDN/1-u0 hungup new state:CLEANING P[ 1] $$$ CLEANUP CALLED pid:2 P[ 1] $$$ Cleaning up bc with stid :10010100 pid:2 P[ 1] --> ec_disable P[ 1] Sending Control ECHOCAN_OFF P[ 1] ph_control: c1:2319 c2:0 P[ 1] empty_chan_in_stack: 1 P[ 0] handle_bchan: BC not found for prim:f2481 with addr:55010180 dinfo:0 P[ 0] received 1k Unhandled Bchannel Messages: prim f2481 len 0 from addr 55010180, dinfo 0 on this port. P[ 1] MGMT: SSTATUS: L1_DEACTIVATED -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users