Thanks for pointing to the debug. I found that the path to phpagi was not right and since I fixed that everything seems to work fine.
Now, I want to know if I can use a phpagi command to check the status of SIP Peer if it is online and registered or not. I know I can use *grep with asterisk rx "sip show peers" *and use that as a shell script but I think there are better methods in Asterisk dialplan or in phpagi that it can be check. Thanks, Bruce On Mon, Jun 14, 2010 at 5:27 PM, Carlos Chavez <cur...@telecomabmex.com>wrote: > If you do an "agi set debug on" from the CLI and run your AGI you > should see something like this: > > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_request: auth.agi > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_channel: SIP/206-00000d9b > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_language: es > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_type: SIP > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_uniqueid: 1276192380.5115 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_version: 1.6.2.8 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_callerid: 206 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_calleridname: Carmen Saavedra > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_callingpres: 0 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_callingani2: 0 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_callington: 0 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_callingtns: 0 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_dnid: *22081019999282711 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_rdnis: unknown > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_context: oficina > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_extension: *22081019999282711 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_priority: 2 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_enhanced: 0.0 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_accountcode: > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_threadid: -1234945136 > [Jun 10 12:53:00] VERBOSE[8515] res_agi.c: <SIP/206-00000d9b>AGI Tx >> > agi_arg_1: ldnac > > As you can see agi_extension and agi_dnid should contain the number > that the user dialed. Those are all the variables that are > automatically sent to the AGI script from Asterisk. I do not know why > you are getting the channel instead of the extension, you could try > giving the extension as a parameter to the AGI script if you cannot get > that from the included request variable. > > On Mon, 2010-06-14 at 14:57 -0400, bruce bruce wrote: > > Carlos, Thanks a lot for getting me started. That helps a great deal. > > > > > > Currently, the $agi->request['agi_extension']; returns the SIP > > channel info with IP and I want that to be the incoming DID number. > > > > > > My dialplan output is this for line one: > > > > > > exten => _x.,1,NoOp(${EXTEN}) > > > > > > 415444555 > > > > > > But with the agi_extension it comes back as: > > NoOp("SIP/64.111.222.111-00000ca7", "") > > > > > > Where can I find the list of command requests that can be sent to > > Asterisk? Specially that for DID. > > > > > > Thanks > > > > > > On Mon, Jun 14, 2010 at 2:15 PM, Carlos Chavez > > <cur...@telecomabmex.com> wrote: > > On Mon, 2010-06-14 at 13:41 -0400, bruce bruce wrote: > > > Hi Carlso, > > > > > > > > > Thanks for the input. I have done this in php and am not > > familiar with > > > phpagi. > > > So, there is absolutely no way to temporarily solve this > > problem by > > > getting the value back from php file? > > > > > > > > > Wondering if it would require a lot of work to change the > > php file to > > > phpagi? > > > Thanks, > > > Bruce > > > > > > > Here is an example: > > > > exten => _x.,1,AGI(sample.agi) > > exten => _x.,n,NoOp(${var}) > > > > > > sample.agi: > > > > #!/usr/bin/php -q > > <?php > > set_time_limit(30); > > require('phpagi/phpagi.php'); > > $agi = new AGI(); > > $exten = $agi->request['agi_extension']; //Dialed extension > > // the result is stored in $exten > > // do something with your data > > $agi->set_variable("var", $result); > > $agi->verbose("The result was: $result", 3); > > ?> > > > > You can even send parameters to the AGI via the command > > line like: > > > > exten => _x.,1,AGI(sample.agi,param1,param2) //Use comma for > > 1.6 or | > > for 1.4 or below > > > > And access them via $argv[1], $argv[2] is there is some > > extra > > information that you cannot get via the AGI variables. > > > > -- > > > > Telecomunicaciones Abiertas de México S.A. de C.V. > > Carlos Chávez Prats > > Director de Tecnología > > +52-55-91169161 ext 2001 > > > > > > -- > > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by > > http://www.api-digital.com -- > > New to Asterisk? Join us for a live introductory webinar every > > Thurs: > > http://www.asterisk.org/hello > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > New to Asterisk? Join us for a live introductory webinar every Thurs: > > http://www.asterisk.org/hello > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > Telecomunicaciones Abiertas de México S.A. de C.V. > Carlos Chávez Prats > Director de Tecnología > +52-55-91169161 ext 2001 > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users