Thanks for the tips. This is an 8 FXO channel Astribank. My understanding is that Trixbox 2.8 already had everything dahdi related installed so there is no driver from Astribank. I followed this page and did rpm -Uvh for freepbx-module-zapauto
http://www.xorcom.com/downloads/astribank2-dahdi.html What other steps do I have to take to complete the installation if you think I have not finished. Or where can I look to find the problem? As you could see from my last e-mail, everything seemed fine except for the voltage part. I am SURE that PSTN lines are connected to the box. Thanks <http://www.xorcom.com/downloads/astribank2-trixbox-ce-drivers.html#trixboxce2.8> On Tue, Jun 22, 2010 at 5:25 AM, Tzafrir Cohen <tzafrir.co...@xorcom.com>wrote: > On Tue, Jun 22, 2010 at 12:58:00AM -0400, bruce bruce wrote: > > Hi Guys, > > > > An 8 channel > > FXO? > > > Astribank is connected to Trixbox 2.8 and I ran > > freepbx-module-zapauto but I get the following when running these > > commands and can't make calls out: > > > > [Trixbox]# dahdi_genconf xpporder > > /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing > > '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc > > Which one, exactly? Trixbox originally had rather dates DAHDI drivers. I > believe you should now be able to find much newer ones. At least in > their repos. > > > > > pbx*CLI> dahdi show channels > > Chan Extension Context Language MOH Interpret Blocked State > > > > pseudo default default In Service > > 1 from-pstn default In Service > > 2 from-pstn default In Service > > 3 from-pstn default In Service > > 4 from-pstn default In Service > > 5 from-pstn default In Service > > 6 from-pstn default In Service > > > > 7 from-pstn default In Service > > 8 from-pstn default In Service > > > > pbx*CLI> dahdi show status > > Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO > > Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) > > > > > > pbx*CLI> dahdi show regdump 1 > > Unable to get registers on channel 1 > > Unable to get stats on channel 1 > > I believe that regdump uses some specific interface to the Digium card. > If you want a bunch of technical information you don't really > understand, look under /proc/xpp/ . I'm not going to start explaining it > beyond > > http://docs.tzafrir.org.il/dahdi-linux/README.Astribank.html#_proc_interface > > > > > [Trixbox]# dahdi_hardware -v > > /usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing > > '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc > > > > usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware > > LABEL=[usb:X1044207] connect...@usb-0000:00:1d.7-4 > > XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC > > > > > > Note: This Astribank is deployed in United Arab Emirates and I am not > > sure what the line type is in terms of Ground or Loop start and > > wondering if that makes a difference with the Astribank and the fact > > that it can't how the voltage using "show regdump" > > IIRC they use LS (That is: no power denial is used at the end of a > call). > > > > > And I am definitly not sure what that warning of OLD DRIVER is about. > > Any help is appreciated. > > At the time we wrote it, we relied heavily on procfs. However procfs is > not something that can be safely used when the module is loaded or > removed. This is a fine way to get panics. Thus we gradually moved many > things from /proc to /sys . > > Typically such a message would mean a combination of older dahdi-linux > (loaded) and newer dahdi-tools. Though it's a warning, and not an error. > > -- > Tzafrir Cohen > icq#16849755 > jabber:tzafrir.co...@xorcom.com<jabber%3atzafrir.co...@xorcom.com> > +972-50-7952406 mailto:tzafrir.co...@xorcom.com > http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
