On Thu, 29 Jul 2010 20:47:58 -0500 (CDT), Tim Nelson wrote > ----- "Carlos Chavez" <cur...@telecomabmex.com> wrote: > > I have a problem with a Sangoma card. It worked until yesterday. > > Now > > I keep getting this error: > > > > Jul 29 17:45:17 pbxacura kernel: wanpipe1: Enable E1 CAS signalling > > mode! > > Jul 29 17:45:17 pbxacura kernel: wanpipe1:w1g1: Rx Error: No > > 'DeviceSelect' from target: pci fatal error! (0x000FA000) > > Jul 29 17:45:48 pbxacura last message repeated 30946 times > > > > It is using Wanpipe 3.5.6 and Zaptel 1.4.12.1 with Asterisk 1.4.30 > > and > > MFC/R2. The E1 shows Tx side blocked and no calls in or out. I > > reinstalled Wanpipe and Zaptel but I keep getting the same error. > > > > Sounds like your card needs to be: > > 1. Reseated in it's PCI slot > 2. RMA'ed to Sangoma > > Either way, contact Sangoma's top notch tech support and they'll > either help you fix the issue or get you a replacement. > I already moved the card to another PCI slot and contacted tech support at Sangoma. Just covering all the bases in case someone here had the same experience.
-- Carlos Chavez Director de Tecnología Telecomunicaciones Abiertas de México S.A. de C.V. Tel: +52-55-91169161 Ext 2001 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users