Dear Tarek, IN_USE is other then the BUSY status, i want to skip the BUSY agent but not IN_USE
-- Regards, Shariq Khan 0333-3501125 On Wed, Sep 15, 2010 at 4:07 PM, Tarek Sawah <tareksa...@hotmail.com> wrote: > Gareth > > Usualy the queue has the ability to know if the agent is "INUSE" and skip > them.. you can simply use ringinuse=no to the queues.conf under the queue > itself or the general section and that's it .. no need for the whole > dialplan.. as you are using SIP members. > Salam > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Gareth > Blades > Sent: Wednesday, September 15, 2010 1:46 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Skip Busy Agents/Channels from Queue > > Yes something like this. Note the Execif syntax I have used is for > asterisk 1.6 > > exten => s,n,Set(AGENTSBUSY=yes) > exten => s,n,ExecIf($[${DEVICE_STATE(SIP/1009} = > NOT_INUSE]?Set(AGENTSBUSY=no)) > exten => s,n,ExecIf($[${DEVICE_STATE(SIP/1010} = > NOT_INUSE]?Set(AGENTSBUSY=no)) > exten => s,n,ExecIf($[$AGENTSBUSY = no]?QUEUE(xxx)) > > > Shariq Khan wrote: > > You mean, I need to check the DEVICE_STATUS of both (sip) users before > > sending the caller into queue, otherwise skip the caller from going into > > Queue by using ExecIf. > > > > > > -- > > Regards, > > Shariq Khan > > 0333-3501125 > > > > > > > > On Wed, Sep 15, 2010 at 3:16 PM, Gareth Blades > > <list-aster...@skycomuk.com <mailto:list-aster...@skycomuk.com>> wrote: > > > > Shariq Khan wrote: > > > Is there a way skip / ignore the member whose status is busy in > > the Queue. > > > > > > I have two channel member in queue and i have set the peer limit > > 2 for > > > these members. > > > > > > I want to skip those member who are currently on the call > > (answered to > > > calls) and now their status is busy, if Queue see the busy status > > caller > > > will not enter in the Queue and go to the next priority. > > > > > > [test-queue] > > > strategy = rrmemory > > > memberdelay=0 > > > timeoutrestart = no > > > joinempty = strict > > > leavewhenempty = yes > > > timeout = 50 > > > member => SIP/1009 > > > member => SIP/1010 > > > > > > sip.conf > > > > > > [1009] > > > username=1009 > > > type=friend > > > secret=XXXX > > > mailbox=779000 > > > context=default > > > host=dynamic > > > call-limit=2 > > > > > > [1010] > > > username=1010 > > > type=friend > > > secret=XXXX > > > mailbox=779000 > > > context=default > > > host=dynamic > > > call-limit=2 > > > > > > > > > > > > -- > > > Regards, > > > Shariq Khan > > > 0333-3501125 > > > > > > > You could use ${DEVICE_STATE(SIP/1009}. Set a variable to indicate > all > > extensions are busy and then a couple of ExecIf calls to reset the > > variable if either of the extensions state is set to NOT_INUSE. You > then > > have a variab you can use to decide where to jump to in the dialplan > > depending on whether both phones are busy or not. > > > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > > New to Asterisk? Join us for a live introductory webinar every Thurs: > > http://www.asterisk.org/hello > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users