On 10/10/10 12:11 AM, Flavio Miranda wrote: > > Actully, my system.conf in /etc/dahdi was wrong or at least , > imcomplete. I am trying for a long time to configure one TDM 410p board > and one TE110p om the server . so far without success! >
In my opinion, the easiest way to get jump started is with dahdi_genconf that is installed as part of the dahdi-tools package. 1) Assuming you are not in North America you most likely want lines like "options wctdm24xxp companding=alaw" and "options wcte11xp t1e1override=1" in /etc/modprobe.d/dahdi.conf. 2) modprobe wcte12xp && modprobe wctdm24xxp (make sure the order here matches the order in /etc/dahdi/modules) 3) run dahdi_genconf. This will create /etc/dahdi/system.conf and an /etc/asterisk/dahdi-channels.conf that you can use in your chan_dahdi.conf (either copy / or include). 4) OPTIONAL but recommended: Comment out all the other drivers in /etc/dahdi/modules (leaving only wcte11xp and wctdm24xxp) 5) '/etc/init.d/dahdi restart' and run dahdi_scan to make sure all the expected channels came up. You may have to tweak the settings some and most definitely will if you're using the TE110P as an interface to a channel bank (but I doubt you are if you also have a TDM410 installed). But at least you'll have a good start at this point. -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
