On 10/20/2010 10:32 AM, Shaun Ruffell wrote: > On 10/20/2010 09:05 AM, Mark Deneen wrote: > >> On Wed, Oct 20, 2010 at 9:33 AM, Danny Nicholas<[email protected]> wrote: >> >>> Hello list, >>> >>> This may or may not be Asterisk related, but if I had hair >>> I’d >>> pull it out over this. I have a TDM400P card in a Dell POWEREDGE 1550 >>> running Asterisk 1.4.30. Everything works great except that every time it >>> rains, I get flooded with this CLI message – >>> >> >> >>> Any suggestions? >>> >>> >> Talk to your phone company. It sounds like there is water in (on?) >> your lines. Back when I was on dialup, I had a big problem with this >> after a rain storm and I could only connect at 9600 baud. >> >> > +1 for talking to your phone company. I don't believe there is a way > the driver / hardware can handle if water is shorting tip and ring on > your lines (without breaking something else). > > I agree as well, your line is getting shorted to either ground or something with the polarity reversed and biasing it into that condition. A 9V battery in series with (not across) the line might provide some temporary relief when this happens, but its a line problem. Simple diagnosis, when it rains is your server wet ? if not then its not likely part of the problem or solution.
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
