*Bump* No takers? Perhaps no-one else thinks this is a bug? Regards, Steve
On 7 February 2011 16:45, Steve Davies <davies...@gmail.com> wrote: > Hi, > > The following IAX config (slightly edited) causes an issue for me in > version 1.6.2.16.1, where my CDR data is unreliable. > > [user1] > type=friend > auth=md5 > accountcode=user1 > notransfer=yes > context=context1 > host=10.0.0.250 > username=user1 > secret=secret1 > disallow=all > allow=alaw > > [user2] > type=friend > auth=md5 > accountcode=user2 > notransfer=yes > context=context2 > host=dynamic > deny=0.0.0.0/0.0.0.0 > permit=10.0.0.0/24 > username=user2 > secret= > disallow=all > allow=alaw > > If a call comes in from 10.0.0.250, using username "user2" and with no > password, then it is correctly authenticated against the [user2] > section. > Accountcode is set to user2 > Context is set to context2 > and the call mostly proceeds correctly, BUT the source channel name is > set to IAX2/user1-nnnn, which is then seen both in the dialplan debug > output, and in the CDR. I would expect the channel name to reflect the > section name that was used to authenticate the call ie. > IAX2/user2-nnnn; I specifically put a password onto [user1] so there > is no possibility that the call is authenticating there. > > Am I missing something? Or is this a bug? > > Thanks, > Steve > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
