You're not properly reading in the response after each NoOp you send out. Each time you send something to asterisk in AGI, you must read the response in your script.
Thanks, --Warren Selby, dCAP On Feb 22, 2011, at 4:39 AM, Gilles <codecompl...@free.fr> wrote: > Hello > > Incoming calls from the FXO trigger an AGI script which simply NOOP > data sent by Asterisk through stdin. > > The first two NOOP work fine, but after this, Asterisk isn't happy: > > ============= extensions.conf > ... > [from_fxo] > exten => s,1,Wait(2) > exten => s,n,Set(CID=${CALLERID(num)}) > exten => s,n,AGI(/var/tmp/test.lua) > exten => s,n,Wait(5) > exten => s,n,Hangup > > ============= /var/tmp/test.lua > #!/usr/bin/lua > > --Must empty stdin for CHANNEL STATUS to work > while true do > local line = io.read() > if line == "" then break end > io.write("NOOP ",line,"\n") > end > > ============= Console > centos*CLI> > -- Starting simple switch on 'DAHDI/1-1' > -- Executing [s@from_fxo:1] Wait("DAHDI/1-1", "2") in new stack > -- Executing [s@from_fxo:2] Set("DAHDI/1-1", "CID=123465") in new > stack > -- Executing [s@from_fxo:3] AGI("DAHDI/1-1", "/var/tmp/test.lua") > in new stack > -- Launched AGI Script /var/tmp/test.lua > AGI Tx >> agi_request: /var/tmp/test.lua > AGI Tx >> agi_channel: DAHDI/1-1 > AGI Tx >> agi_language: en > AGI Tx >> agi_type: DAHDI > AGI Tx >> agi_uniqueid: 1298367207.9 > AGI Tx >> agi_callerid: 0177628460 > AGI Tx >> agi_calleridname: unknown > AGI Tx >> agi_callingpres: 0 > AGI Tx >> agi_callingani2: 0 > AGI Tx >> agi_callington: 0 > AGI Tx >> agi_callingtns: 0 > AGI Tx >> agi_dnid: unknown > AGI Tx >> agi_rdnis: unknown > AGI Tx >> agi_context: from_fxo > AGI Tx >> agi_extension: s > AGI Tx >> agi_priority: 3 > AGI Tx >> agi_enhanced: 0.0 > AGI Tx >> agi_accountcode: > AGI Tx >> > AGI Rx << NOOP agi_request: /var/tmp/test.lua > AGI Tx >> 200 result=0 > AGI Rx << NOOP agi_channel: DAHDI/1-1 > AGI Tx >> 200 result=0 > [Feb 22 10:33:30] ERROR[5444]: utils.c:967 ast_carefulwrite: write() > returned error: Broken pipe > AGI Rx << NOOP agi_language: en > AGI Tx >> 200 result=0 > [Feb 22 10:33:30] ERROR[5444]: utils.c:967 ast_carefulwrite: write() > returned error: Broken pipe > ================= > > Has someone experienced the same thing? Am I doing it wrong, or is > 1.4.39.1 broken and I should downgrade to a known, good build? > > Thank you. > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users