Hey, I did ./Setup dahdi and everything went well but i didn't find any command wancfg_dahdi
---------------------------------------------------------- WANPIPE v3.5.19 Installation Script Copyright (c) 1995-2010, Sangoma Technologies Inc. ---------------------------------------------------------- WANPIPE META CONFIGURATION There are two configuration files associated with WANPIPE. 1) /usr/local/src/asterisk/wanpipe-3.5.19/wanrouter.rc: - defines locations of important files such as lock and configuration files as well as start/stop order of multiple WANPIPE devices. 2) /usr/local/src/asterisk/wanpipe-3.5.19/wanpipe1.conf: - main configuration file for each WANPIPE device. - defines interfaces, hardware and protocol information. - this file can be created using the 'wancfg' GUI utility or manually based on sample files located in /etc/wanpipe/samples. Please read the WanpipeInstallation.(pdf/txt) manual for further information. Wanpipe META config file found in /etc/wanpipe directory Wanpipe startup sequence: wanpipe1 ---------------------------------------------------------- WANPIPE v3.5.19 Installation Script Copyright (c) 1995-2010, Sangoma Technologies Inc. ---------------------------------------------------------- WANPIPE UTILITIES SETUP WANPIPE utilities are used to: 1) create configuration files: for Zaptel and Asterisk /usr/sbin/wancfg_zaptel #Zaptel and Asterisk /usr/sbin/wancfg_dahdi #Dahdi and Asterisk /usr/sbin/wancfg_smg #BRI/SS7, Zaptel and Asterisk /usr/sbin/wancfg_tdmapi #TDM API 2) create WANPIPE WAN/IP configuration files. (/usr/sbin/wancfg) 3) start,stop,restart individual/all devices and interfaces. (/usr/sbin/wanrouter) 4) debug line, protocol and driver problems. (/usr/sbin/wanpipemon) 5) aid in WANPIPE API development (/etc/wanpipe/api) Refer to the WanpipeInstallation.(pdf/txt) for more information. Compiling WANPIPE Utilities ... Done. Compiling WANPIPE WanCfg Utility ...Done. Compiling WANPIPE LibSangoma API library ...Done. Compiling WANPIPE LibStelephony API library ...Done. Compiling WANPIPE API Development Utilities ...Done. Compiling WANPIPE HWEC Utilities ...Done. WANPIPE Environment Setup Complete !!! Installing WANPIPE Files ... ! Installing WANPIPE Utilities in /usr/sbin Installing wanrouter.rc in /etc/wanpipe Installing wanpipe libraries in /etc/wanpipe Installing firmware in /etc/wanpipe/firmware Installing documentation in /usr/share/doc/wanpipe Installing sample api code in /etc/wanpipe/api Installing AFT Firmware update utility in /etc/wanpipe/util cp: cannot overwrite non-directory `/etc/wanpipe/util/wan_aftup' with directory `util/wan_aftup/' Installing driver headers in /etc/wanpipe/api/include/linux Installing Hardware Echo Cancel Utilites ---------------------------------------------------------- WANPIPE v3.5.19 Installation Script Copyright (c) 1995-2010, Sangoma Technologies Inc. ---------------------------------------------------------- WANPIPE INSTALLATON: COMPLETE WANPIPE installation is now complete. WANPIPE kernel drivers and configuration/debug utilities have been compiled and installed. 1) Proceed to configure the WANPIPE drivers: Asterisk/Zaptel : /usr/sbin/wancfg_zaptel Asterisk/Dahdi : /usr/sbin/wancfg_dahdi TDM API : /usr/sbin/wancfg_tdmapi SMG SS7/BRI/PRI : /usr/sbin/wancfg_smg WAN Routing/API : /usr/sbin/wancfg 2) Use the /usr/sbin/wanrouter startup script to start and stop the router. (eg: wanrouter start) 3) To uninstall WANPIPE package run ./Setup remove Please read http://wiki.sangoma.com for further instructions. root@example:/usr/local/src/asterisk/wanpipe-3.5.19# wancfg_dahdi wancfg_dahdi: command not found root@example:/usr/local/src/asterisk/wanpipe-3.5.19# Date: Wed, 23 Mar 2011 09:28:25 +0100 From: t...@ovm-group.com To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Sangoma wapipe installation error Try: cd /usr/src/dahdi ./Setup dahdi That's it. Am 22.03.2011 21:06, schrieb satish patel: Hey! I am installing Sangoma A102D wanpipe driver and i got following error. what is this ? why dir isn't there ? wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi wanpipe-3.5.16 # make install ....Send .... .... Installing Wanpipe Firmware update utility in /etc/wanpipe/util/wan_aftup install -D wan_aftup /usr/sbin/wan_aftup install -d /etc/wanpipe/util/wan_aftup/scripts install: cannot create directory `/etc/wanpipe/util/wan_aftup': Not a directory make[2]: *** [install] Error 1 make[2]: Leaving directory `/usr/local/src/asterisk/wanpipe-3.5.16/util/wan_aftup' make[1]: *** [install] Error 2 make[1]: Leaving directory `/usr/local/src/asterisk/wanpipe-3.5.16/util' make: *** [install_util] Error 2 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users