On Wed, Apr 13, 2011 at 8:07 PM, satish patel < satish...@hotmail.com > wrote: Try dmesg command root@XXXX:~# dmesg | grep -i Sangoma [ 2303.473601] WANPIPE(tm) Hardware Support Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc [ 2303.481115] WANPIPE(tm) Interface Support Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc [ 2303.494824] WANPIPE(tm) Multi-Protocol WAN Driver Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc [ 2303.506498] WANPIPE(tm) Socket API Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc [ 2303.525334] WANPIPE(tm) WANEC Layer 3.5.19.0 (c) 1995-2006 Sangoma Technologies Inc. Hi Satish dmesg | grep -i Sangoma does not show anything If lspci isn't showing the device, then your board is not recognizing it. Try another slot, and make sure the card is seated 100% tightly into the slot. And, of course, make sure the system is powered off while doing this. 99.999% of people already know this, but I've been bitten by the other 0.001% that don't. :-) If you're still not showing it, a call to Sangoma support is probably in order. They are top notch. --Tim
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
