hi you can add this in extenssion.conf
exten => 223,1,Answer() exten => 223,2,MixMonitor(test_${UNIQUEID}.wav|av(0)V(0)) exten => 223,3,Dial(SIP/223) exten => 223,4,Hangup() i can record without any issue in /var/spool/asterisk/monitor 2011/5/4 Bruce B <bruceb...@gmail.com> > Thanks for the input. > > Yes, I did call out many times, but the recording doesn't happen even after > the call is bridged and there is two way audio. I also took out the "b" > option and so it should recording the ringing right (even before call is > bridged) but it doesn't do that or any recording at all. > > Any other suggestions as to what I can do to see why this is not recording? > > Regards, > > > On Tue, May 3, 2011 at 2:13 AM, virendra bhati <virbh...@gmail.com> wrote: > >> Hi, >> >> As per your Dialplan MixMonitor will work after call bridge, In you case >> still call is not bridge. That's why MixMonitor is waiting of call bridge... >> >> * >> MixMonitor(Q-${QDIALER_QUEUE}-${UNIQUEID}.WAV,b,) >> option b=>** A bridge flag allows recording to only take place when the >> channel is bridged.* >> >> So just for test make sip call and start mixmonitor to test the recorded >> file. >> default path od recording id >> * >> /var/spool/asterisk/monitor/ >> >> * >> On Tue, May 3, 2011 at 10:40 AM, Bruce B <bruceb...@gmail.com> wrote: >> >>> Hi everyone, >>> >>> For some reason MixMonitor doesn't record when it should; It actually >>> shows the MixMonitor line just fine on the CLI. How can MixMonitor be >>> debugged for things like privilege issues or filename issues? >>> >>> **I had this working at one point and then stopped working. Not sure what >>> I changed. >>> >>> System Info: >>> Asterisk 1.4.21.2 >>> Queuemetrics 1.6.3.0 >>> >>> >>> [queuedial] >>> ; this piece of dialplan is just a calling hook into the [qm-queuedial] >>> context that actually does the >>> ; outbound dialing - replace as needed - just fill in the same variables. >>> exten => _XXX.,1,Set(QDIALER_QUEUE=q-${EXTEN:0:3}) >>> exten => _XXX.,n,Set(QDIALER_NUMBER=${EXTEN:3}) >>> exten => _XXX.,n,Set(QDIALER_AGENT=Agent/${CALLERID(num)}) >>> exten => _XXX.,n,Set(QDIALER_CHANNEL=ZAP/g0/${QDIALER_NUMBER}) >>> exten => _XXX.,n,Set(QueueName=${QDIALER_QUEUE}) >>> *exten => _XXX.,n,MixMonitor(Q-${QDIALER_QUEUE}-${UNIQUEID}.WAV,b,)* >>> exten => _XXX.,n,Goto(qm-queuedial,s,1) >>> >>> CLI output: >>> -- Called 4904166356574@queuedial/n >>> -- Executing [4904166356574@queuedial:1] >>> Set("Local/4904166356574@queuedial-d851,2", "QDIALER_QUEUE=q-490") in >>> new stack >>> -- Executing [4904166356574@queuedial:2] >>> Set("Local/4904166356574@queuedial-d851,2", "QDIALER_NUMBER=4166356574") >>> in new stack >>> -- Executing [4904166356574@queuedial:3] >>> Set("Local/4904166356574@queuedial-d851,2", >>> "QDIALER_AGENT=Agent/19053640558") in new stack >>> -- Executing [4904166356574@queuedial:4] >>> Set("Local/4904166356574@queuedial-d851,2", >>> "QDIALER_CHANNEL=ZAP/g0/4166356574") in new stack >>> -- Executing [4904166356574@queuedial:5] >>> Set("Local/4904166356574@queuedial-d851,2", "QueueName=q-490") in new >>> stack >>> * -- Executing [4904166356574@queuedial:6] >>> MixMonitor("Local/4904166356574@queuedial-d851,2", >>> "Q-q-490-1304399098.18.WAV|b|") in new stack* >>> -- Executing [4904166356574@queuedial:7] >>> Goto("Local/4904166356574@queuedial-d851,2", "qm-queuedial|s|1") in new >>> stack >>> -- Goto (qm-queuedial,s,1) >>> >>> Trying to locate file: >>> root@pbx:~ $ updatedb >>> root@pbx:~ $ locate Q-q-490-1304399098.18.WAV >>> root@pbx:~ $ ls /var/spool/asterisk/monitor/Q-q* >>> ls: /var/spool/asterisk/monitor/Q-q*: No such file or directory >>> >>> I also turned on the Debug but I couldn't see anything out of the norm. >>> As you can see above the CLI output is just fine. >>> >>> Thanks, >>> Bruce >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >> >> -- >> >> >> >> ----- >> Thanks and regards >> >> Virendra Bhati >> +91-9172341457 >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users