On 6 May 2011 16:30, Eric Wieling <ewiel...@nyigc.com> wrote: >> -----Original Message----- >> From: asterisk-users-boun...@lists.digium.com >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of >> Cassius Smith >> Sent: Friday, May 06, 2011 11:23 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: [asterisk-users] Asterisk 1.6.2.18, Cisco 79XX not >> registering >> >> Hi all, >> I have a production server running with about 90 Cisco >> 79[46]1's and SIP release 8.5(2)SR1 from last year. I was >> running Asterisk 1.6.2.9 and upgraded last night after hours. >> (Seemed low risk to me!) >> >> Much to my surprise, not a single one of the Cisco 79XX >> phones would register. Since it's a production server, I >> rolled back to 1.6.2.9 and everything was fine. All my >> Linksys SPA phones and Polycom speaker phones registered just fine. >> >> I am now setting up test servers with both 1.6.2.18 and >> 1.8.3.3 to collect some debug. >> >> I am just curious - has anyone else had SIP issues with these >> phones and updating Asterisk broke them? >> >> I will post results of my findings after I have time to collect them. >> >> Cassius Smitha >> > > I seem to recall this issue mentioned on asterisk-dev. Check > issues.digium.com and see if there is anything similar to your issue. >
I also remember this being mentioned - I believe it was fixed in the chan_sip Via: header handling code. The fix is in branches/1.6.2 already, so you should be able to grab the patch without too much trouble. Regards, Steve -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
