I just reread your original email, and I think I answered the wrong question.
On Wed, May 11, 2011 at 11:36:04PM -0500, Shaun Ruffell wrote: > On Wed, May 11, 2011 at 10:54:06PM -0300, Alejandro Cabrera Obed wrote: > > Dear, I have Asterisk 1.6 with an E1 Digium card with echo > > cancellation module. So I need to use just the echo cancellation by > > hardware and disable the echo cancellation by software. I use DAHDI > > for my telephony hardware. ... > With all current releases of DAHDI if a span has a hardware echocanceler > available, it will be used regardless of the settings in > /etc/dahdi/system.conf. The above paragraph is the answer to your original question. If you have a hardware echo canceler module installed it will always be used in preference to the software echo cancelers. Although still again this will not be true in DAHDI Linux 2.5.0 when it's released. Hardware echocan will then need to be configured just like the software echo cancelers. -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users