On Wed, May 4, 2011 at 1:01 PM, M Shokuie <sena...@gmail.com> wrote: > Dear folks, > > We have recently installed A400D card with 12 FXO modules, the serer is HP > DL180 G6, cards works fine but after a while all the calls get an awful > noise, you can not get what each side says. The noise cleares as soon as we > restart wanrouter but not asterisk (i mean asterisk restart does not solve). > We previsouly confronted this situation with PRI cards but not analogs, > wanpipe version is 3.5.18 and zaptel 1.4.12 also tested with recent DAHDI > with out any help. ifconfig doesnt show any overruns or errors. Once earlier > we had the same problem and come to the conclusion to change the mainboard > but this time i got mad as i couldnt change a 3000$ HP server that easy. > > Is there a way i could get if there is any problem of interrupts, when i > check interrupts i could not see any shared interrupts for Snagoma card. > > Anyhelp would be highly appreciated. > -- >
Hello M Shokuie, This kind of troubleshooting is better addressed by Sangoma technical support staff. You can send an email to techd...@sangoma.com and you will be taken care of. Regards, Moises Silva Senior Software Engineer, Software Development Manager Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. m...@sangoma.com
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users