History: 1. Added X100P to my system 2. Added Sipura 3. Added TDM400P (2 port) Worked fine so far 4. Now I want to add an additional X100P
My question is...is the following configs files ok and is there any issue with adding the X100P (channel 4) after my 2 analog FXS channels? Thanks. Steve Here is my /etc/zaptel.conf fxsks=1,4 fxols=2-3 loadzone = us defaultzone = us Here is my /etc/asterisk/zapata.conf ; Zapata telephony interface sample configuration file ; [channels] ; ; X100P plugged into PSTN ; X100P # 1 context=incoming signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no busydetect=no callprogress=no musiconhold=default usecallerid=yes callerid=asreceived channel => 1 ; ; ; ; TDM200B Port #1 plugged into analog Phone ; ; context=toll-access signalling=fxo_ls callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no musiconhold=default usecallerid=yes callerid="Livingroom" <2201> mailbox=2201 channel => 2 ; ; TDM200B Port #2 ; ; context=toll-access signalling=fxo_ls callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no musiconhold=default usecallerid=yes callerid="Kitchen" <2202> mailbox=2202 channel => 3 ; X100P # 2 context=incoming signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no busydetect=no callprogress=no musiconhold=default usecallerid=yes callerid=asreceived channel => 4 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
