On 5/27/11 6:33 PM, Gordon Henderson wrote: > Personally I'd avoid Patton. No-one has a clue how to configure them. > I've struggled for the past couple of days and have given up and they're > being sent back to be replaced by Mediatrix boxes.
Then you're asking the wrong people. It is totally possible to get a Patton to be configured correctly. Since PRI is much easier to configure than a BRI interface (PtP, PtMP?) it shouldn't be that hard. The problem with these very powerful VoIP to ISDN gateways is that they have lots of things to configure, some more intuitive than others. If you're using real hardware, be prepared to spend real time and effort into configuring them. The webinterfaces on Patton or Audiocodes gateways are miles better than the CLI on a Cisco AS5350 or the CLI on an Acme Packet SBC. The bad rep Patton and Audiocodes seem to have is probably related to them using the same software for a simple 2xFXO port gateway as those for 4xISDN BRI or 4x ISDN PRI. -- Andreas Sikkema -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users