What company card you have? Copy paste your dahdi config and
chan_dahdi.conf
--
Sent from my iPhone
On Jun 15, 2011, at 6:53 AM, bilal ghayyad <bilmar...@yahoo.com> wrote:
Dears;
The problem was related to something else.
The Digium card has two PRI ports, actually to get it UP, I have to
configure the two ports and both of those two ports to take the
timing from span 1.
Why this, I do not know ! Although I am using only one E1 connected
to span 1, so why I have to configure the other span !!
After configuring the second span, so now one D channel for span 1
is UP and the other is down (because no E1 cable connected to the
other span), now I can remove the configuration for the other span
and the D channel for the first span will stay UP, but at anytime,
the E1 might come back down again and I have to configure the other
span port again to get the E1 up on the first span.
Any advise for this?
Regards
Bilal
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users