On 06/01/2011 01:12 PM, Karsten Wemheuer wrote: > Hi randall, > > Am Mittwoch, den 01.06.2011, 10:00 +0200 schrieb randall: >>> > i get the following errors: >>> > pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel >>> > of span 2 >>> > >>> > >>> > Your telco provider has crc on or off , that is not matching with >>> > your server cross check with them. >>> > and this problem solve 4 problems >>> > >>> > >>> thanks for the reply, >>> >>> what is crc (same as crc-4?) >>> and where can i set this? >>> >>> same crc or crc4 >>> >>> -- >> adding crc as follows, span=1,1,0,ccs,ami,crc, causes DAHDI to not load >> at all > > As I can see from Your first post, You are using BRI in > point-to-multipoint mode. On BRI lines there is nothing like CRC/CRC4 > and that is the reason, why the config is not loading any more. > > On a PTMP line there may be some CRC-errors from time to time, when the > provider shuts down the line, which is normal in some countries. But > this has nothing to do with Your initial problem. > > Unfortunately I don't know a solution for Your problem. It may be a > hardware issue.
is there a way to trace down the hardware causing this? > > HTH, > > Karsten > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users