On Fri, Aug 26, 2011 at 10:58:10AM +0800, Kelvin Chua wrote: > I should clarify on my post, i can see a red alarm on cat /proc/dahdi/1 but > never when using dahdi_tool > > in cat /proc/dahdi/1: > Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) > > 1 WCTDM/4/0 FXSKS (In use) RED(SWEC: OSLEC) > 2 WCTDM/4/1 FXSKS (In use) RED(SWEC: OSLEC) > 3 WCTDM/4/2 FXSKS (In use) RED(SWEC: OSLEC) > 4 WCTDM/4/3 FXSKS (In use) RED(SWEC: OSLEC) > > In dahdi_tool: > Tx/Rx Levels: 0/ 0 > Total/Conf/Act: 4/ 4/ 0 > > but the behavior status alarm is OK > a little bit misleading, what i am thinking is adding a sort of "yellow" > alarm or something if one of the configured fxo lines > goes down?
I understand now. Yes, dahdi_tool is showing the alarm status for the entire span, and for analog cards, the entire span is always essentially green. It's the individual channels that can go into red alarm unlike on digital spans. Why do you want to add a yellow status? What are you trying to accomplish that you cannot with the way things are now? > another thing, what if 1 of the configured lines' battery is up, but there > is no dial tone? outbound calls will try to go through > and the caller will hear dead air. 'callprogress=yes' in chan_dahdi.conf won't help you here? It may be able to detect dialtone before attempting to dial out. -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
