Hi list
I have 2 servers with a TDM400 card, port 1 populated by an FXO (red)
module), port 4 populated with an FXS module. I am using dahdi
linux and tools 2.5.0.1. The servers are running CentOS 4 and the other
box CentOS 6.
Both modules have been working fine but recently stopped working, when i
start dahdi with just FXS enabled everything is fine.
This is the error i get :
Loading DAHDI hardware modules:
wctdm: [ OK ]
Running dahdi_cfg: DAHDI_CHANCONFIG failed on channel 1: Invalid argument
(22)
Selected signaling not supported
Possible causes:
FXO signaling is being used on a FXO interface (use a FXS
signaling variant)
RBS signaling is being used on a E1 CCS span
Signaling is being assigned to channel 16 of an E1 CAS span
[FAILED]
This is in my system.conf :
fxoks=1
echocanceller=mg2,1
# channel 2, WCTDM/4/1, no module.
# channel 3, WCTDM/4/2, no module.
fxsks=4
echocanceller=mg2,4
# Global data
loadzone = nl
defaultzone = nl
When i run dahdi_genconf it doesn't detect the module either :
# Autogenerated by /usr/sbin/dahdi_genconf on Fri Sep 23 11:24:16 2011
# Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
# channel 1, WCTDM/4/0, no module.
# channel 2, WCTDM/4/1, no module.
# channel 3, WCTDM/4/2, no module.
fxsks=4
echocanceller=mg2,4
I already replaced both FXO modules with new ones but without result.
Ideas anyone?
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
