Hello Have a setup of asterisk with realtime SIP devices. Trying to organise monitoring of my SIP devices. Once device registered, its state becomes NOT_INUSE (result of DEVICE_STATE(SIP/device) function). Simulating of device breakage - powerdown it. Waiting for a while (minute or two), retrieving DEVICE_STATE(SIP/device) again - no changes! Awaited UNAVAILABLE.
doing from CLI: sip qualify peer device load no result. What I did not configured? My sip.conf [general] context = default allowguest = no bindport = 5060 bindaddr = 0.0.0.0 allowexternaldomains = no allowoverlap = yes allowsubscribe = yes allowtransfer = yes alwaysauthreject = no autodomain = no callevents = no canreinvite = no checkmwi = 10 compactheaders = no defaultexpiry = 120 domain=sop-korniychuk domain=172.30.8.13 domain=172.30.8.13:5060 dumphistory = no externrefresh = 10 g726nonstandard = no notifyringing = yes srvlookup = yes t1min = 100 t38pt_udptl = no ;tos_audio = none ;tos_sip = none ;tos_video = none trustrpid = no useragent = Asterisk PBX usereqphone = no videosupport = no disallow = all allow = alaw type = friend host=dynamic context = noop-context dtmfmode=rfc2833 nat=no rtcachefriends=yes qualify=10000 deny=0.0.0.0/0.0.0.0 permit=172.30.8.0/255.255.255.0 regards, Yaroslav -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
