Excellent. Do you think these functions would enable me to create rules based on both the concurrent # of inbound and/or outbound calls, or only total # of concurrent calls (agnostic to call direction being inbound vs. outbound)?
Thanks, - Doug Mortensen Network Consultant Impala Networks P: 505.327.7300 -----Original Message----- From: Steve Edwards [mailto:asterisk....@sedwards.com] Sent: Monday, December 19, 2011 5:52 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Limit # of inbound calls on SIP trunk On Mon, 19 Dec 2011, Douglas Mortensen wrote: > I have a system with FreePBX, and as far as I can tell it does not > provide a means to limit the number of simultaneous inbound calls on a > SIP trunk. Therefore I suspect that I’ll need to do some manual > dialplan manipulation. The GROUP() and GROUP_COUNT() functions and the GOTOIF() application should do the trick. -- Thanks in advance, ------------------------------------------------------------------------- Steve Edwards sedwa...@sedwards.com Voice: +1-760-468-3867 PST Newline Fax: +1-760-731-3000 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users