Hi, I have a redhat 9 asterisk server with tdm400p three ports, and a x100p installed at
home. I am not running X or framebuffers. Every so often like once a month, I lose dial tone on my channels.
Asterisk still responds at the cli. I don’t see
any log entries pertaining to this. If I restart asterisk it does not change. I
have to reboot the computer, which I would think would be a hardware problem,
or an OS issue. I can’t seem to make it happen when I want so
troubleshooting is an issue. The irq’s are ok
as seen below. I am not doing smp, or multithreading
as some posts would reveal that as a problem. These are brand new cards from Digium.
The tdm is a new card with the power connected. I
tested the power supply and it is supplied the correct voltages.
CPU0 0: 9298672
XT-PIC
timer 1:
4
XT-PIC
keyboard 2:
0
XT-PIC
cascade 8:
1
XT-PIC rtc 9: 251135
XT-PIC usb-uhci, eth0 10: 92378687
XT-PIC wcfxs 11: 92395359
XT-PIC wcfxo 12:
20
XT-PIC PS/2
Mouse 14: 75560
XT-PIC
ide0 15:
0
XT-PIC
ide1 NMI:
0 ERR:
0 Please respond if someone is aware of these types of
problems. Thanks in advance, Bob |
- Re: [Asterisk-Users] TDM card loses Dial tone Bob Bevins
- Re: [Asterisk-Users] TDM card loses Dial tone Glenn Dalgliesh
- Re: [Asterisk-Users] TDM card loses Dial to... Robert Lawrence
- Re: [Asterisk-Users] TDM card loses Dial to... Youness El Andaloussi
- Re: [Asterisk-Users] TDM card loses Dia... John Vozza
- Re: [Asterisk-Users] TDM card loses... Ulexus
- Re: [Asterisk-Users] TDM card ... Jeff Roberts