Hi there Happy New Year
I have a new install of asterisk 1.8.8.1 on ubuntu server 3.0.0-14-server #23-Ubuntu SMP Mon Nov 21 20:49:05 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux It has a Sangoma A200 card and I thought should be fairly standard but I have a new error when trying to start asterisk and I don't really know where to start Initially asterisk was installed with dahdi from a package but sangoma didn't seem happy. Once I added dahdi from source sangoma wanpipe installed okay, but when I reloaded asterisk it stopped. So I removed all the packages (I believe I have but something could be hanging around) and rebuilt asterisk from source. Same errors. The only errors I can see are limited - I also stopped wan router and dahdi and I still get ~# asterisk -cvvvvvvvvvv Illegal instruction Which isn't very informative. Kind of a fun challenge but not one I need right now Google hasn't been able to find a similar issue My choices that I can see are: - try another version of asterisk - delete everything and start again (which I thought I have tried but maybe not thorough enough) - earlier version of ubuntu But I would really like to understand what's clashing. The sangoma card details are from lspci 04:03.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: NEC Corporation Device 0700 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 255 (1250ns min, 3750ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K] Output of dmesg looks fine until it gets to asterisk right at the bottom which gives this [ 13.419761] asterisk[1352] trap invalid opcode ip:5316f3 sp:7fff2db1a0f0 error:0 in asterisk[400000+1d6000] dmesg long version [ 5.051430] WANPIPE(tm) Hardware Support Module 3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc [ 5.052051] usbcore: registered new interface driver sdlausb [ 5.063329] dahdi: Telephony Interface Registered on major 196 [ 5.063334] dahdi: Version: 2.5.0.2 [ 5.071841] WANPIPE(tm) Interface Support Module 3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc [ 5.098753] WANPIPE(tm) Multi-Protocol WAN Driver Module 3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc [ 5.098759] wanpipe: Probing for WANPIPE hardware. [ 5.098846] pci 0000:04:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.110126] wanpipe: AFT-A200-SH PCI FXO/FXS card found (HDLC rev.7), cpu(s) 1, bus #4, slot #3, irq #5 [ 5.110137] wanpipe: Allocating maximum 1 devices: wanpipe1 - wanpipe1. [ 5.110606] WANPIPE: TDM Codecs Initialized [ 5.138361] WANPIPE(tm) Socket API Module 3.5.24.0 (c) 1994-2010 Sangoma Technologies Inc [ 5.138368] NET: Registered protocol family 25 [ 5.171801] WANPIPE(tm) WANEC Layer 3.5.24.0 (c) 1995-2006 Sangoma Technologies Inc. [ 5.171807] wanec_create_dev: Registering Wanpipe ECDEV Device! [ 5.211707] wanpipe1: Starting WAN Setup [ 5.211713] [ 5.211715] Processing WAN device wanpipe1... [ 5.211719] wanpipe1: Locating: A200/A400/B600/B700/B800 card, CPU A, PciBus=4, PciSlot=3 [ 5.211728] wanpipe1: Found: A200/A400/B600/B700/B800 card, CPU A, PciBus=4, PciSlot=3, Port=0 [ 5.211785] wanpipe1: AFT PCI memory at 0xDFDF0000 [ 5.211788] wanpipe1: IRQ 17 allocated to the AFT PCI card [ 5.211841] wanpipe1: Starting AFT Analog Hardware Init. [ 5.211874] wanpipe1: Enabling front end link monitor [ 5.211879] wanpipe1: Global Chip Configuration: used=1 used_type=1 [ 5.211906] wanpipe1: Global Front End Configuration! [ 5.211909] wanpipe1: Configuring FXS/FXO Front End ... [ 5.424637] wanpipe1: Module 1: Installed -- Auto FXO (AUSTRALIA mode)! [ 5.624587] wanpipe1: Module 2: Installed -- Auto FXO (AUSTRALIA mode)! [ 5.824637] wanpipe1: Module 3: Installed -- Auto FXO (AUSTRALIA mode)! [ 6.025333] wanpipe1: Module 4: Installed -- Auto FXO (AUSTRALIA mode)! [ 6.225169] wanpipe1: Module 5: Installed -- Auto FXO (AUSTRALIA mode)! [ 6.425906] wanpipe1: Module 6: Installed -- Auto FXO (AUSTRALIA mode)! [ 6.624559] wanpipe1: Module 7: Installed -- Auto FXO (AUSTRALIA mode)! [ 6.824553] wanpipe1: Module 8: Installed -- Auto FXO (AUSTRALIA mode)! [ 6.824560] wanpipe1: Running post initialization... [ 6.824563] wanpipe1: Remora config done! [ 6.824567] wanpipe1: AFT Data Mux Bit Map: 0x01234567 [ 6.824794] wanpipe1: Front End Interface Ready 0x00000000 [ 6.824805] wanpipe1: Register EC interface wanec1 (usage 1, max ec chans 32)! [ 6.824811] wanpipe1: Configuring Device :wanpipe1 FrmVr=07 [ 6.824814] wanpipe1: Global MTU = 1500 [ 6.824817] wanpipe1: Global MRU = 1500 [ 6.824819] wanpipe1: Data Mux Map = 0x01234567 [ 6.824821] wanpipe1: Rx CRC Bytes = 0 [ 6.824824] wanpipe1: Memory: Card=73888 Wandev=2088 Card Union=13464 [ 6.824827] wanpipe1: Global TDM Int = Disabled [ 6.824829] wanpipe1: Global TDM Ring= Disabled [ 6.824831] wanpipe1: Global SPAN IRQ= RX/TX [ 6.824834] wanpipe1: TDM HW TONE = Enabled [ 6.824836] wanpipe1: TDMV Span = 1 : Enabled [ 6.824838] wanpipe1: TDMV Dummy = Disabled [ 6.824842] wanpipe1: RTP TAP = Disabled [ 6.825055] wanpipe1: Global Poll IRQ= Disabled [ 6.825059] wanpipe1: Configuring Interface: w1g1 [ 6.825070] wanpipe1:w1g1: Running in TDM Voice Zaptel Mode. [ 6.825076] wanpipe1: Registering TDMV FXO iface to module 1! [ 6.825080] wanpipe1: MRU :8 (Chunk/Period=8/1) [ 6.825082] wanpipe1: MTU :8 (Chunk/Period=8/1) [ 6.825084] wanpipe1: HDLC Eng :Off (Transparent) | N/A [ 6.825090] wanpipe1: Data Mux Ctrl :On [ 6.825093] wanpipe1: Active Ch Map :0x00000001 [ 6.825095] wanpipe1: First TSlot :0 [ 6.825105] wanpipe1: DMA/Len/Idle/ChainR/ChainT/EC :65/1024/8/Off/Off/On [ 6.825109] wanpipe1: Memory: Chan=5688 [ 6.825165] [ 6.825167] wanpipe1: Configuring Interface: w1g1 (log supress) [ 6.825177] wanpipe1: Registering TDMV FXO iface to module 2! [ 6.825180] wanpipe1: Active Ch Map :0x00000002 [ 6.825183] wanpipe1: First TSlot :1 [ 6.825237] [ 6.825239] wanpipe1: Configuring Interface: w1g1 (log supress) [ 6.825247] wanpipe1: Registering TDMV FXO iface to module 3! [ 6.825250] wanpipe1: Active Ch Map :0x00000004 [ 6.825252] wanpipe1: First TSlot :2 [ 6.825308] [ 6.825311] wanpipe1: Configuring Interface: w1g1 (log supress) [ 6.825320] wanpipe1: Registering TDMV FXO iface to module 4! [ 6.825324] wanpipe1: Active Ch Map :0x00000008 [ 6.825326] wanpipe1: First TSlot :3 [ 6.825382] [ 6.825384] wanpipe1: Configuring Interface: w1g1 (log supress) [ 6.825393] wanpipe1: Registering TDMV FXO iface to module 5! [ 6.825399] wanpipe1: Active Ch Map :0x00000010 [ 6.825401] wanpipe1: First TSlot :4 [ 6.825459] [ 6.825461] wanpipe1: Configuring Interface: w1g1 (log supress) [ 6.825470] wanpipe1: Registering TDMV FXO iface to module 6! [ 6.825473] wanpipe1: Active Ch Map :0x00000020 [ 6.825476] wanpipe1: First TSlot :5 [ 6.825533] [ 6.825535] wanpipe1: Configuring Interface: w1g1 (log supress) [ 6.825546] wanpipe1: Registering TDMV FXO iface to module 7! [ 6.825553] wanpipe1: Active Ch Map :0x00000040 [ 6.825555] wanpipe1: First TSlot :6 [ 6.825611] [ 6.825613] wanpipe1: Configuring Interface: w1g1 (log supress) [ 6.825621] wanpipe1: Configuring TDMV Master dev w1g1 [ 6.825624] wanpipe1: Registering TDMV FXO iface to module 8! [ 6.825627] wanpipe1: Active Ch Map :0x00000080 [ 6.825629] wanpipe1: First TSlot :7 [ 6.825693] [ 6.825697] wanpipe1: ALAW override parameter detected. Device will be operating in ALAW [ 6.825703] wanpipe1: Not used module 9! [ 6.825705] wanpipe1: Not used module 10! [ 6.825708] wanpipe1: Not used module 11! [ 6.825710] wanpipe1: Not used module 12! [ 6.825712] wanpipe1: Not used module 13! [ 6.825714] wanpipe1: Not used module 14! [ 6.825717] wanpipe1: Not used module 15! [ 6.825719] wanpipe1: Not used module 16! [ 6.825721] wanpipe1: Not used module 17! [ 6.825723] wanpipe1: Not used module 18! [ 6.825726] wanpipe1: Not used module 19! [ 6.825728] wanpipe1: Not used module 20! [ 6.825730] wanpipe1: Not used module 21! [ 6.825732] wanpipe1: Not used module 22! [ 6.825735] wanpipe1: Not used module 23! [ 6.825737] wanpipe1: Not used module 24! [ 6.826726] wanpipe1: Wanpipe device is registered to Zaptel span # 1! [ 6.826730] wanpipe1: Enable HW Tone detection! [ 6.827433] wanpipe1: AFT communications enabled! [ 6.827438] wanpipe1: AFT Per Port TDM Intr (swring) [ 6.847962] wanpipe1: Clear Echo Canceller chip reset. [ 11.603798] wanpipe1: Module 2: FXO Line is disconnected! [ 11.604802] wanpipe1: Module 3: FXO Line is disconnected! [ 11.605797] wanpipe1: Module 4: FXO Line is disconnected! [ 11.606797] wanpipe1: Module 5: FXO Line is disconnected! [ 11.607792] wanpipe1: Module 6: FXO Line is disconnected! [ 11.608800] wanpipe1: Module 7: FXO Line is disconnected! [ 11.609797] wanpipe1: Module 8: FXO Line is disconnected! [ 11.626795] wanpipe1: Module 1: FXO Line is disconnected! [ 11.711529] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.713900] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.716182] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.718464] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.720746] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.723929] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.727950] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.731102] wanec1: Opening HW Echo: [Mode=Normal NoiseRed=Off VQE=1836 DtmfRmv=Off Acust=Off NLP=On ] [ 11.902954] dahdi_transcode: Loaded. [ 12.041997] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.057832] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.057854] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.077575] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.077598] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.077612] wanpipe1: Open (usecount=1, channo=3, chanpos=3)... [ 12.096928] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.096950] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.096965] wanpipe1: Open (usecount=1, channo=3, chanpos=3)... [ 12.096978] wanpipe1: Open (usecount=1, channo=4, chanpos=4)... [ 12.116871] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.116893] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.116908] wanpipe1: Open (usecount=1, channo=3, chanpos=3)... [ 12.116922] wanpipe1: Open (usecount=1, channo=4, chanpos=4)... [ 12.116936] wanpipe1: Open (usecount=1, channo=5, chanpos=5)... [ 12.135829] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.135851] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.135866] wanpipe1: Open (usecount=1, channo=3, chanpos=3)... [ 12.135880] wanpipe1: Open (usecount=1, channo=4, chanpos=4)... [ 12.135894] wanpipe1: Open (usecount=1, channo=5, chanpos=5)... [ 12.135907] wanpipe1: Open (usecount=1, channo=6, chanpos=6)... [ 12.152571] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.152594] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.152609] wanpipe1: Open (usecount=1, channo=3, chanpos=3)... [ 12.152624] wanpipe1: Open (usecount=1, channo=4, chanpos=4)... [ 12.152638] wanpipe1: Open (usecount=1, channo=5, chanpos=5)... [ 12.152651] wanpipe1: Open (usecount=1, channo=6, chanpos=6)... [ 12.152665] wanpipe1: Open (usecount=1, channo=7, chanpos=7)... [ 12.172565] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.172587] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.172602] wanpipe1: Open (usecount=1, channo=3, chanpos=3)... [ 12.172617] wanpipe1: Open (usecount=1, channo=4, chanpos=4)... [ 12.172631] wanpipe1: Open (usecount=1, channo=5, chanpos=5)... [ 12.172645] wanpipe1: Open (usecount=1, channo=6, chanpos=6)... [ 12.172659] wanpipe1: Open (usecount=1, channo=7, chanpos=7)... [ 12.172673] wanpipe1: Open (usecount=1, channo=8, chanpos=8)... [ 12.585008] dahdi_echocan_mg2: Registered echo canceler 'MG2' [ 12.587225] wanpipe1: Open (usecount=1, channo=1, chanpos=1)... [ 12.587246] wanpipe1: Open (usecount=1, channo=2, chanpos=2)... [ 12.587260] wanpipe1: Open (usecount=1, channo=3, chanpos=3)... [ 12.587275] wanpipe1: Open (usecount=1, channo=4, chanpos=4)... [ 12.587289] wanpipe1: Open (usecount=1, channo=5, chanpos=5)... [ 12.587303] wanpipe1: Open (usecount=1, channo=6, chanpos=6)... [ 12.587317] wanpipe1: Open (usecount=1, channo=7, chanpos=7)... [ 12.587331] wanpipe1: Open (usecount=1, channo=8, chanpos=8)... [ 13.419761] asterisk[1352] trap invalid opcode ip:5316f3 sp:7fff2db1a0f0 error:0 in asterisk[400000+1d6000] [ 14.344275] br0: no IPv6 routers present [ 18.848045] br0: port 1(eth0) entering forwarding state -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users