I had the same problem, Digium sent me a new card and now all is well. MATT---
-----Original Message----- From: Scott Stingel [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 11, 2004 1:03 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] "Stuck" TE410P cards Hello all- I have 3 TE410P cards in service in the field. Two of them have an regular problem that they get "stuck" during a system reboot. What I mean is that they display no LED's during any part of the restart, and they are not seen by the drivers during or after the reboot. The only thing that brings them back to life is to power down and restart the box they are in. Even pressing the reset button on the processor does not clear their state. This sounds very much like a hardware problem with the cards, since one would assume normally that a front panel reset would clear a stuck card. Has anyone else experienced these symptoms? This happens fairly regularly on two of the three TE410P cards. It does not happen with older cards such as the E400P, of which I have several. Thanks Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: [EMAIL PROTECTED] URL: www.evtmedia.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users