On Fri, Jan 6, 2012 at 10:01 AM, Benny Amorsen <benny+use...@amorsen.dk>wrote:
> David Backeberg <dbackeb...@gmail.com> writes: > > > Thanks for clearing that up. I was getting all excited that I could > > flash the PAP2T; I've always used regular voice tones over SIP with > > the PAP2Ts. > > SPA-2102 supports T.38. If you ignore the WAN-port, it is practically a > PAP2T. The only time you cannot ignore the WAN-port is when doing > provisioning. I ignore the LAN (yellow) port and only use the WAN (blue) port. The LAN port has a DHCP server enabled by default. The WAN port is setup with a DHCP client. The good thing about using the WAN port is if the settings are cleared you won't have an unknown DHCP server on your network. I plug a phone in and dial the below. Then you can configure the rest from the web interface. **** to enter admin ivr 7932 enter 1 to enable web interface 110 will read the WAN address Ryan
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
