Did a little research on this using my Asterisk 10.0. This should
work for you.
exten => 1246,1,answer()
exten => 1246,n,set(inuse=${CHANNELS(miq8)})
exten => 1246,n,extenspy(${inuse}@default)
exten => 1246,n,hangup()
*From:*asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of *Jonas
Kellens
*Sent:* Tuesday, January 24, 2012 9:52 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
Hello,
there is very little information about the function CHANNELS().
If I know the peer name (that I always know for sure), do you see a
way of using the function CHANNELS() to get the right channel ??
If CHANNELS() gives a "space-delimited" list of active channels, and I
know miq8... how can I get /SIP/miq8-00002419/ ?
Thanks !
On 01/24/2012 04:46 PM, Danny Nicholas wrote:
Extenspy(miq8@default) for miq8. I would either proceed under the
assumption that I'm going to be listening to my extensions in the
default context or set up an AGI or something to load my needed
ext@context information.
*From:*asterisk-users-boun...@lists.digium.com
<mailto:asterisk-users-boun...@lists.digium.com>
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of *Jonas
Kellens
*Sent:* Tuesday, January 24, 2012 9:41 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
Hello,
how to use ExtenSpy(extension@context) when conversations are named
like this ? :
/SIP/*378680644-00002* default
SIP/*rs4-00002445* sub-uitinternation
SIP/*3715320168-00002* default
SIP*/ibenla2-0000244* sub-uit789
SIP/*372083610-00002* default
SIP/*cedhou0-000024* sub-uit789
SIP*/travel3-00002* pbx-routing
SIP/*INTELin-00002* pbx-routing
SIP/*375382280-00002* default
SIP/*miq8-00002419* sub-uitGSM
SIP/*3749378004-0000* default
SIP*/instlpr0-00002* sub-uitinternation
/
Can you tell me what is the extension ? How will I know the context ?
The context is not always the same...
On 01/24/2012 04:32 PM, Danny Nicholas wrote:
You are either going to be able to listen to SIP/miq8 or you are going
to have to know the sequence number like SIP/miq8-00001. Maybe you
should just use ExtenSpy instead?
*From:*asterisk-users-boun...@lists.digium.com
<mailto:asterisk-users-boun...@lists.digium.com>
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of *Jonas
Kellens
*Sent:* Tuesday, January 24, 2012 9:26 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
Of course I can control the name of my SIP-peer. Why do you tell me
this ?!
Please answer my question : how do I know the channel name so I can
ChanSpy the correct channel ?
On 01/24/2012 04:13 PM, Danny Nicholas wrote:
It's not random. The "Channel Name" is Tech/peer-sequence (sequence
is in hex). You can control (to a degree) the peer portion in
sip.conf/users.conf.
*From:*asterisk-users-boun...@lists.digium.com
<mailto:asterisk-users-boun...@lists.digium.com>
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of *Jonas
Kellens
*Sent:* Tuesday, January 24, 2012 9:07 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
Hello,
thanks. miq8 is the name of the SIP peer account.
So when I know the SIP peer name, and I strip of the numbers of the
channel, then I can use ChanSpy. So this answers my original question.
The only problem I see : it is Asterisk that gives the channel its
name. How do I change this ??
As far as I know, Asterisk randomly gives a channel name which
consists of the technology (SIP), the peername (miq8) and some numbers...
How to change the channel name ?
On 01/24/2012 03:53 PM, Danny Nicholas wrote:
I would try chanspy(sip/miq8,b) -- the b flag denotes to only listen
to a bridged call which (it seems to me) should pick up both sides.
*From:*asterisk-users-boun...@lists.digium.com
<mailto:asterisk-users-boun...@lists.digium.com>
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of *Jonas
Kellens
*Sent:* Tuesday, January 24, 2012 8:46 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
Hello,
OK thanks. But, I want to listen to the conversation (not just 1
channel out of 2 channels). How then do I use ChanSpy ?
On 01/24/2012 03:41 PM, Danny Nicholas wrote:
Strip off the --xxxxx. Just listen to SIP/miq8 and SIP/375382280 in
your example.
*From:*asterisk-users-boun...@lists.digium.com
<mailto:asterisk-users-boun...@lists.digium.com>
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of *Jonas
Kellens
*Sent:* Tuesday, January 24, 2012 7:47 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* [asterisk-users] ChanSpy : how to know channel name ?
Hello list,
to use ChanSpy, one needs to know the name of the channel.
But on an incoming call from the provider, or an outgoing call to the
provider there are always numbers added. How can one then know the
channel name ??
/core show channels verbose/ shows me for example :
/SIP/*378680644-00002* default
SIP/*rs4-00002445* sub-uitinternation
SIP/*3715320168-00002* default
SIP*/ibenla2-0000244* sub-uit789
SIP/*372083610-00002* default
SIP/*cedhou0-000024* sub-uit789
SIP*/travel3-00002* pbx-routing
SIP/*INTELin-00002* pbx-routing
SIP/*375382280-00002* default
SIP/*miq8-00002419* sub-uitGSM
SIP/*3749378004-0000* default
SIP*/instlpr0-00002* sub-uitinternation
SIP/*372089170-00002* default
SIP/*v9q9uLT-0000* from-GFATRUNK
46 active channels
24 active calls/
If I want to listen to the conversation of /SIP/*miq8-00002419*/ and
/SIP/*375382280-00002*/ (these 2 channels have been connected to 1
conversation), how do I use ChanSpy ??
Kind regards;
Jonas.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
