On Mon, 2012-03-12 at 09:11 -0400, Bryant Zimmerman wrote: > Looking at the information you have sent in this posting in certainly > appears that the 'f' option has indeed helped however you have > another > matter to overcome. > > You may wish to set the following parameters in your peer > configuration > for 588. > > ignoresdpversion=yes This one passed me by, thanks for the info > directmedia=no > > I use Spandsp FAX successfully. > > I have also attached an analogue Fax Modem to the FXS port on an > SPA8800 > and an HT-502 and have been able to receive faxes on them when I last > tested, the SPA8800 like the HT-502 are now in storage. > > Looking at the User Guide for the Vigor 2701 there is an option in > the > configuration to enable T.38 mode, did you enable it? Foolishly I hadn't and feel very stupid about that! > > > In my sip.conf I have the following; > > [general] > . > . > . > faxdetect=cng > t38pt_udptl=yes,redundancy,maxdatagram=400 tried this and ,fec, > ;t38pt_usertpsource=yes had this already set > . > . > . > [903] > ; Cisco SPA8800 FXS Port 3 > ; Grandstream HT502 FXS Port 1 > ; Analogue FAX Modem attached > type=friend > defaultuser=903 > secret=you_guessed_it > call-limit=2 > disallow=g722 > transport=udp > qualify=yes > canreinvite=no > directmedia=no > host=dynamic > context=FAX-T38 > faxdetect=no > > Larry. > > > It's still not working but not throwing any errors at all. I've checked that the fax machine itself works (actually hoping that it wouldn't and that would explain my problem) by plugging it into a phone line and it does.
Now getting the following == Using UDPTL CoS mark 5 == Using SIP RTP CoS mark 5 -- Executing [200@local:1] Goto("SIP/588-0000000b", "fax-in,s,1") -- Goto (fax-in,s,1) -- Executing [s@fax-in:1] Answer("SIP/588-0000000b", "") -- Executing [s@fax-in:2] Wait("SIP/588-0000000b", "3") -- Executing [s@fax-in:3] Set("SIP/588-0000000b", "FAXFILE=/tmp/fax-588-20120312-144800.tiff") -- Executing [s@fax-in:4] ReceiveFAX("SIP/588-0000000b", "/tmp/fax-588-20120312-144800.tiff,f") -- Channel 'SIP/588-0000000b' receiving FAX '/tmp/fax-588-20120312-144800.tiff' -- Channel 'SIP/588-0000000b' FAX session '11' started -- FAX handle 0: [ 000.000190 ], STAT_EVT_STRT_RX st: IDLE rt: IDLENSRX -- FAX handle 0: [ 000.000277 ], STAT_EVT_RX_HW_RDY st: WT_RX_HW_RDY rt: RRDYNHRY -- FAX handle 0: [ 000.000308 ], P30EVN_RECEIVE_STARTED -- FAX handle 0: [ 000.000341 ], STAT_INFO_CSI -- FAX handle 0: [ 000.000377 ], STAT_INFO_DIS -- FAX handle 0: [ 002.174255 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21 -- FAX handle 0: [ 005.503113 ], STAT_EVT_T4_EXP st: WT_DIS_RSP rt: RXXXNFRX -- FAX handle 0: [ 005.503170 ], STAT_INFO_CSI -- FAX handle 0: [ 005.503202 ], STAT_INFO_DIS -- FAX handle 0: [ 007.669035 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21 -- FAX handle 0: [ 011.001891 ], STAT_EVT_T4_EXP st: WT_DIS_RSP rt: RXXXNFRX -- FAX handle 0: [ 011.001943 ], STAT_INFO_CSI -- FAX handle 0: [ 011.001974 ], STAT_INFO_DIS -- FAX handle 0: [ 013.169811 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21 -- FAX handle 0: [ 016.502670 ], STAT_EVT_T4_EXP st: WT_DIS_RSP rt: RXXXNFRX -- FAX handle 0: [ 016.502723 ], STAT_INFO_CSI -- FAX handle 0: [ 016.502753 ], STAT_INFO_DIS -- FAX handle 0: [ 018.668594 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21 -- FAX handle 0: [ 022.001447 ], STAT_EVT_T4_EXP st: WT_DIS_RSP rt: RXXXNFRX -- FAX handle 0: [ 022.001496 ], STAT_INFO_CSI -- FAX handle 0: [ 022.001527 ], STAT_INFO_DIS -- FAX handle 0: [ 024.169368 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21 -- FAX handle 0: [ 027.503224 ], STAT_EVT_T4_EXP st: WT_DIS_RSP rt: RXXXNFRX -- FAX handle 0: [ 027.503282 ], STAT_INFO_CSI -- FAX handle 0: [ 027.503313 ], STAT_INFO_DIS -- FAX handle 0: [ 029.669146 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21 -- FAX handle 0: [ 033.002003 ], STAT_EVT_T4_EXP st: WT_DIS_RSP rt: RXXXNFRX -- FAX handle 0: [ 033.002054 ], STAT_INFO_CSI -- FAX handle 0: [ 033.002084 ], STAT_INFO_DIS -- FAX handle 0: [ 035.169922 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21 -- FAX handle 0: [ 038.502780 ], STAT_EVT_T4_EXP st: WT_DIS_RSP rt: RXXXNFRX -- FAX handle 0: [ 038.502835 ], STAT_INFO_CSI -- FAX handle 0: [ 038.502866 ], STAT_INFO_DIS -- FAX handle 0: [ 040.001719 ], STAT_EVT_T1_EXP st: WT_DIS_RSP rt: WDSRNT1X -- FAX handle 0: [ 040.001764 ], P30EVN_PHASE_E -- FAX handle 0: [ 040.001783 ], entering CLOSING state -- FAX handle 0: [ 040.001798 ], STAT_FRM_DCN -- FAX handle 0: [ 040.668702 ], STAT_EVT_TX_V21_DONE st: SEND_DCN rt: XDCNNT21 -- FAX handle 0: [ 041.195677 ], STAT_EVT_TX_V21_DONE st: WT_HW_CLS rt: UNEXPECT -- FAX handle 0: [ 043.170593 ], STAT_EVT_HW_CLOSE st: WT_HW_CLS rt: WCLSNCLS -- FAX handle 0: [ 043.170706 ], STAT_SES_COMPLETE -- FAX handle 0: [ 043.170730 ], P30EVN_COMPLETE -- Channel 'SIP/588-0000000b' FAX session '11' is complete, result: 'FAILED' (FAX_NO_FAX), error: 'T1_TIMEOUT', pages: 0, resolution: 'unknown', transfer rate: '2400', remoteSID: '' -- Executing [s@fax-in:5] Hangup("SIP/588-0000000b", "") == Spawn extension (fax-in, s, 5) exited non-zero on 'SIP/588-0000000b' -- Executing [h@fax-in:1] NoOP("SIP/588-0000000b", "### FAXSTATUS: FAILED") -- Executing [h@fax-in:2] NoOP("SIP/588-0000000b", "### FAXERROR: T1_TIMEOUT") -- Executing [h@fax-in:3] NoOP("SIP/588-0000000b", "### FAXMODE: ") -- Executing [h@fax-in:4] NoOP("SIP/588-0000000b", "### FAXPAGES: 0") -- Executing [h@fax-in:5] NoOP("SIP/588-0000000b", "### FAXBITRATE: 2400") -- Executing [h@fax-in:6] NoOP("SIP/588-0000000b", "### FAXRESOLUTION: unknown") -- Executing [h@fax-in:7] NoOP("SIP/588-0000000b", "### REMOTESTATIONID: ") -- Executing [h@fax-in:8] System("SIP/588-0000000b", "mail -s FaxToEmail i...@pack-net.co.uk < /tmp/fax-588-20120312-144800.tiff") Thanks for the input so far. I'm going to keep plugging away and if anyone has any insights, they will be gladly appreciated. Ish -- Ishfaq Malik Software Developer PackNet Ltd Office: 0161 660 3062 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users