> Try adding > resetinterval = never > here. The default is to reset any idle channels every 3600 seconds. > Unfortunately, if a channel is being reset just as an incoming call > arrives, there is a chance that the channel will get stuck in a > resetting state and block any further use of that channel. Thanks, I'll give this a shot.
> A quick look at your traces indicates that your channels are > "already in use" so an incoming call is cleared with a cause 44. > This can happen if there is a call collision or the channel is > stuck. I would recommend that you minimize call collisions by > making outbound calls pick channels from the opposite end of the > channel range as the network. This is usually by using uppercase G > in the Dial(DAHDI/G1/number) to the first available channel from the > upper end of the channel range. > Our Telco PRI is set inbound and asterisk set descending so we should be good there. I'll double check the Iwatsu PRI's. Thank you, -- Andrew McRory Sayso Communications, Inc. 2850 Industrial Plaza Tallahassee, Florida 32301 Office) 850-224-5737 Mobile) 850-778-3206 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users