Hi, I've tried upgrading one of my servers with yum update to the latest dahdi/asterisk, and found out that my 4th gen TE410P is failing the dahdi init with
Running dahdi_cfg: DAHDI startup failed: Input/output error Rolling back to 2.5 restores the normal operation, and reading the dahdi 2.6 change log I think I'm hitting this bug fix with my mobo/card combo? 2011-12-14 19:02 +0000 [r10379-10380] Shaun Ruffell <sruff...@digium.com> With dahdi 2.6 I'm getting this: #cat /proc/interrupts 209: 1 0 IO-APIC-level wct4xxp No interrupts?! #dmesg kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 209 kernel: wct4xxp 0000:02:01.0: Firmware Version: c01a016c kernel: wct4xxp 0000:02:01.0: FALC Framer Version: 2.1 or earlier kernel: wct4xxp 0000:02:01.0: Found a Wildcard: Wildcard TE410P (4th Gen) kernel: VPM450: echo cancellation for 128 channels kernel: wct4xxp 0000:02:01.0: VPM450: hardware DTMF disabled. kernel: wct4xxp 0000:02:01.0: VPM450: Present and operational servicing 4 span(s) kernel: wct4xxp 0000:02:01.0: TE4XXP: Span 1 configured for CCS/HDB3/CRC4 kernel: wct4xxp 0000:02:01.0: RCLK source set to span 1 kernel: wct4xxp 0000:02:01.0: System timing mode, RCLK set to span 1 kernel: wct4xxp 0000:02:01.0: TE4XXP: Span 2 configured for CCS/HDB3/CRC4 kernel: wct4xxp 0000:02:01.0: RCLK source set to span 1 kernel: wct4xxp 0000:02:01.0: System timing mode, RCLK set to span 1 kernel: wct4xxp 0000:02:01.0: TE4XXP: Span 3 configured for CCS/HDB3/CRC4 kernel: wct4xxp 0000:02:01.0: RCLK source set to span 3 kernel: wct4xxp 0000:02:01.0: Recovered timing mode, RCLK set to span 3 kernel: wct4xxp 0000:02:01.0: SPAN 3: Primary Sync Source kernel: wct4xxp 0000:02:01.0: Interrupts not detected. With dahdi 2.5 everything is OK: #cat /proc/interrupts 201: 9157 962863 IO-APIC-level wct4xxp #dmesg kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 201 kernel: wct4xxp 0000:02:01.0: Found TE4XXP at base address f2000000, remapped to f887c000 kernel: wct4xxp 0000:02:01.0: Firmware Version: c01a016c kernel: wct4xxp 0000:02:01.0: Burst Mode: On kernel: wct4xxp 0000:02:01.0: Octasic Optimizations: Enabled kernel: wct4xxp 0000:02:01.0: FALC Framer Version: 2.1 or earlier kernel: wct4xxp 0000:02:01.0: Board ID: 00 kernel: wct4xxp 0000:02:01.0: Reg 0: 0x37554400 kernel: wct4xxp 0000:02:01.0: Reg 1: 0x37554000 kernel: wct4xxp 0000:02:01.0: Reg 2: 0x00000000 kernel: wct4xxp 0000:02:01.0: Reg 3: 0x00000000 kernel: wct4xxp 0000:02:01.0: Reg 4: 0x00003101 kernel: wct4xxp 0000:02:01.0: Reg 5: 0x00000000 kernel: wct4xxp 0000:02:01.0: Reg 6: 0xc01a016c kernel: wct4xxp 0000:02:01.0: Reg 7: 0x00001f00 kernel: wct4xxp 0000:02:01.0: Reg 8: 0x00000000 kernel: wct4xxp 0000:02:01.0: Reg 9: 0x00ff0031 kernel: wct4xxp 0000:02:01.0: Reg 10: 0x0000004a kernel: wct4xxp 0000:02:01.0: Found a Wildcard: Wildcard TE410P (4th Gen) [snip] wct4xxp 0000:02:01.0: TE4XXP: Span 1 configured for CCS/HDB3/CRC4 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000010c, CIS = 0080 wct4xxp 0000:02:01.0: RCLK source set to span 1 wct4xxp 0000:02:01.0: System timing mode, RCLK set to span 1 wct4xxp 0000:02:01.0: TE4XXP: Span 2 configured for CCS/HDB3/CRC4 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000010c, CIS = 0080 wct4xxp 0000:02:01.0: RCLK source set to span 1 wct4xxp 0000:02:01.0: System timing mode, RCLK set to span 1 wct4xxp 0000:02:01.0: TE4XXP: Span 3 configured for CCS/HDB3/CRC4 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000010d, CIS = 0081 wct4xxp 0000:02:01.0: RCLK source set to span 3 wct4xxp 0000:02:01.0: Recovered timing mode, RCLK set to span 3 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000010a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: SPAN 3: Primary Sync Source wct4xxp 0000:02:01.0: TE4XXP: Span 4 configured for CCS/HDB3/CRC4 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000d, CIS = 0084 wct4xxp 0000:02:01.0: RCLK source set to span 3 wct4xxp 0000:02:01.0: Recovered timing mode, RCLK set to span 3 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000b, CIS = 0088 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000b, CIS = 008a wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000b, CIS = 0085 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000b, CIS = 008a wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 wct4xxp 0000:02:01.0: 2G: Got interrupt, status = 0000000a, CIS = 0080 wct4xxp 0000:02:01.0: Reg 5 is 00000000 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
